User's Guide

12
How to perform a test
1. Touch and hold the power button
until the analyzer turns on
When the analyzer boot process is complete, the
home screen will appear.
2. From the Home screen, tap on the
TEST button
3. Select the sample type
Select the sample type corresponding to your
sample and then press .
For guidance on testing other wine types, see
Page 9.
4. Enter the Sample ID
If the analyzer is configured for Sample ID (see
Page 27), you will be presented with the Enter
Sample ID screen.
Enter the ID and touch Enter.
To switch the keyboard from portrait to
landscape, touch the button on the bottom
left of the keyboard.
You can exit a test at any time by touching
the button on the bottom left of the
screen.