User guide

21
Before adding devices to the ISY, it’s important to understand the 3 different
options presented:
o Remove Existing Links. This option will add the device to the ISY, and
also remove any existing links in the device. This is the default and the
best option to choose if you would like a clean start, or if it is a brand new
device.
o Add Devices Found in Links and Remove Existing Links. This option
will not only add the particular device you press the SET button on, but will
also add any devices that the particular device is linked to. Once
complete, it will then remove any links contained within the devices. This
helps save some time if you have a device you have already linked with
other devices, but still clears out all links to give you a fresh start.
o Add Devices Found in Links and Keep Existing Links. The option not
only adds the particular device you press the SET button on, but will also
add any devices that the particular device is linked to. It will also keep any
pre-existing links between devices, and build ISY scenes out of those
links. This is the best option to choose if you’d like to preserve all existing
links between devices.
 Link a ControLinc, Link a RemoteLinc, Add Button to IRLinc
Receiver/Transmitter, Add Sensor to EZSnSRF Add X10 Device to
EZX10RF, etc.. These are specific options used to add the respective devices to
the ISY. If you are adding one of these devices to the ISY, choose the
corresponding menu option and follow the on-screen instructions.