User guide

22
 Advanced Options. This option adjusts the method used when the ISY is
programming your devices. Please do not touch this option unless instructed by
a UDI support rep.
 New INSTEON Device. This method works much like the Start Linking method,
with one exception – instead of hitting the SET button on each device, you must
type in the device’s INSTEON address. The ISY will then initiate
communications with the device in order to add it to your system. In most cases
you can leave the Device Type option set to Auto Discover, but some devices
may require you to specify the Device Type. For more information please see:
Appendix F: INSTEON Device Notes.
NOTE: This option will be titled “New INSTEON/X10/A10 Device if the
optional X10 Module is installed. Please see the section titled 3.9.6 X10
Module for more information.