User guide

7
1.3 Getting To Know Your ISY
The ISY’s front panel has several elements you should be familiar with:
 The LEDs on the front of your unit show the current status of your ISY. They can
also assist with troubleshooting any issues you may be having. For more
infromation on the ISY’s front panel LEDs and what they mean, please see
Appendix A: Front Panel LEDs.
 A Reset Button is located on the front of your ISY. To simply reboot your ISY,
use a sharp object to briefly press the ISY’s recessed Reset Button. To factory
reset your ISY, please see Appendix B: Performing a Factory Reset.
 Certain ISY-99i Series controllers include an integrated IR receiver located on
the front of the unit. This IR receiver can be used to control your home using an
RC-5-capable universal remote control.
The rear panel of the ISY features the following:
ISY-99i Series
ISY-994i Series
 The Power port is used to provide power to the ISY with an AC adapter. This
may not be necessary if using a 2412S PLM (now discontinued), but is required
when using a 2413S PLM. Please use an AC adapter that provides 5VDC, a
minimum of 300mA, and is center terminal positive.
Even if using a 2412S PLM, there are several reasons why you may want to use
a separate AC adapter instead of power provided by the PLM: