User guide
Table Of Contents
- Installation and setup
- Username/Password
- Automatically add new devices to HomeSeer
- Display Insteon type descriptions
- Split Location/Name from ISY name using character
- Set HomeSeer Location to
- Set HomeSeer Location 2 to
- ISY Insteon Plug-in Logging Level
- Update Device Types
- Remove Duplicates
- Save
- Status Message Filter
- Device Filter
- Advanced Feature
- ISY Insteon Plug-in Status Screen
- ISY Insteon Plug-in Thermostat Control
- Device Control
- Triggers
- Conditions
- Actions
- Thermostat API
- ISY Insteon API
- Tips
- Error Messages
- Warning Messages
ISY Insteon Plug-in Status Screen
When the ISY Insteon Plug-in is installed it will add a plug-in status button to the HomeSeer
web interface.
The first section of the
status display provides
some basic information
about the ISY Insteon Plug-
in. It also contains handy
links to the configuration
page and to the ISY's
Admin Console. The
Pause Plug-in button will
disconnect the plug-in from the ISY. When resumed, the plug-in will re-establish the
connection with the ISY. The Resync with ISY button will cause the plug-in to update it's
internal state with the current ISY state.
The next section displays
statistics about what the ISY
Insteon Plug-in is
controlling. How many
devices, scenes, programs,
etc.
ISY Devices is the total
number of devices the ISY
reported. Devices like
keypads are reported as
multiple devices, each
button represents 1 device.
Unique Devices is the
number of Insteon
addresses reported by the
ISY. For this count, a
keypad would count as 1
device.
The actual devices are
enumerated and counted so
that you can see how many
of each type and version
you have installed.
Some of the counts will only show up if you have one or more of that category.