User guide
Table Of Contents
- Installation and setup
- Username/Password
- Automatically add new devices to HomeSeer
- Display Insteon type descriptions
- Split Location/Name from ISY name using character
- Set HomeSeer Location to
- Set HomeSeer Location 2 to
- ISY Insteon Plug-in Logging Level
- Update Device Types
- Remove Duplicates
- Save
- Status Message Filter
- Device Filter
- Advanced Feature
- ISY Insteon Plug-in Status Screen
- ISY Insteon Plug-in Thermostat Control
- Device Control
- Triggers
- Conditions
- Actions
- Thermostat API
- ISY Insteon API
- Tips
- Error Messages
- Warning Messages
Each Insteon Thermostat
installed will have a section
that displays the current
status of that thermostat.
This section is optional and
will only be displayed if you
have at least one thermostat installed.
If the WeatherBug module
is installed on the ISY, the
current data for all the
weather parameters will be
displayed.
If the Electricity module is
installed on the ISY, the
current parameters will be
displayed.
These sections are optional
and will only be displayed if
you have purchased the
module for your ISY.
The Settings section
displays the current
configuration setting s of the
ISY Insteon Plug-in. .
The Backlog section shows
some internal counters that
allow you to track how active
the ISY Insteon Plug-in has been. There are two counters that are tracked. The number of
commands that have been queued to send to the ISY and the number of messages from the
ISY that are queued waiting to be processed. The counters are displayed as current,
maximum.