User guide

ISY Insteon Plug-in Logging Level
The log level defines how verbose the ISY Insteon Plug-in will be. The following levels are
supported:
1. Errors Only – Only error messages will be written to the log.
2. Warnings – Error messages and warning messages will be written to the log.
3. Status – Errors, warnings, and device update status messages will be written to the
log.
4. Notices – Errors, warnings, device status updates and additional informative messages
will be written to the log.
5. Debug – In addition to the above messages, this will write messages that help isolate
what section of the code the plug-in is executing at any point in time.
6. Verbose Debug – This level will write a great many messages to the log. It should only
be used when trying to isolate specific problems with the plug-in.
7. All – All of the above plus messages that dump raw data received by the plug-in from
the ISY. This is will also write messages with the ISY account information to help
debug connection problems.
Only the first 4 levels should be used under normal conditions.
Update Device Types
This button will cause the ISY Insteon Plug-in to re-evaluate all the device information it has
received from the ISY and update the corresponding HomeSeer device. Normally, the ISY
Insteon Plug-in will do this automatically. This is should only be used if the device types have
somehow become corrupted.
Remove Duplicates
This button will cause the ISY Insteon Plug-in to search the device list and remove any
duplicate devices. In rare cases, the ISY Insteon Plug-in may get confused and re-add
devices that already exist.
Save
Click this to save all your changes to the above settings. Depending on what was changed,
this may cause the ISY Insteon Plug-in to restart.