Cut Sheet

Description: Electronic compact fluorescent ballast(s) for (1) CFM42W/GX24q or (1) CFTR32W/GX24q or
(2/1) CFQ26W/GX24q or (2/1)CFTR26W/Gx24q or (1) CFS28W/GR10q (2D) 4-pin lamps or (1) FC9T5-22W or
(1) FC12T5-40W or (1) CFS38W/GR10q or (1) CFM36W/2G10 or (2/1) FT24W/2G11
C2642UNVxx
x
APPLICATION and PERFORMANCE SPECIFICATION
• Line Voltage: 120vac to 277vac, ±10%, 50-60Hz • Programmed Rapid Start
• High Power Factor • Series Lamp Connection
Line Input Nominal Ballast Power Crest
Model Volts Type # Watts* Line Amps Factor Factor Factor
120 CFQ26W/G24Q 2 56 0.47 .98 > 0.98 < 10% <1.5
277 CFQ26W/G24Q 2 56 0.21 .98 > 0.98 < 10% <1.5
120 CFQ26W/G24Q 1 28 0.25 1.02 > 0.98 < 10% <1.5
277 CFQ26W/G24Q 1 28 0.11 1.02 > 0.98 < 10% <1.5
120 CFTR26W/Gx24q 2 56 0.47 .98 > 0.98 < 10% <1.5
277 CFTR26W/Gx24q 2 56 0.21 .98 > 0.98 < 10% <1.5
120
CFTR26W/G 24
1
28
025
102
098
10%
15
C2642UNV
Lamp
THD
C2642UNV
C2642UNV
120
CFTR26W/G
x
24
q
1
28
0
.
25
1
.
02
>
0
.
98
<
10%
<
1
.
5
277 CFTR26W/Gx24q 1 28 0.11 1.02 > 0.98 < 10% <1.5
120 FT24W/2G11 2 47 0.40 .98 > 0.98 < 10% <1.5
277 FT24W/2G11 2 49 0.18 .98 > 0.99 < 10% <1.5
120 FT24W/2G11 1 26 0.22 1.01 > 0.99 < 10% <1.5
277 FT24W/2G11 1 26 0.10 1.01 > 0.95 < 10% <1.5
120 CFM42W 1 48 0.41 .98 > 0.98 < 10% <1.5
277 CFM42W 1 48 0.18 .98 > 0.98 < 10% <1.5
120 CFTR32W/GX24Q 1 36 0.30 1.00 > 0.98 < 10% <1.5
277 CFTR32W/GX24Q 1 36 0.13 1.00 > 0.98 < 10% <1.5
120 CFS28W/GR10q 1 31 0.27 .95 > 0.95 < 10% <1.6
C2642UNV
C2642UNV
C2642UNV
C2642UNV
C2642UNV
C2642UNV
277 CFS28W/GR10q 1 31 0.12 .95 > 0.95 < 10% <1.6
120 FC9T5-22W 1 25 0.21 1.00 > 0.98 < 10% <1.5
277 FC9T5-22W 1 25 0.10 1.00 > 0.98 < 10% <1.5
120 FC12T5-40W 1 42 0.35 .98 > 0.98 < 10% <1.5
277 FC12T5-40W 1 42 0.16 .98 > 0.98 < 10% <1.5
120 CFS38W/GR10q 1 33 0.27 .80 > 0.95 < 10% <1.6
277 CFS38W/GR10q 1 33 0.12 .80 > 0.95 < 10% <1.6
120 CFM36W/2G10 1 32 0.27 .98 > 0.98 < 10% <1.7
277 CFM36W/2G10 1 32 0.12 .98 > 0.98 < 10% <1.7
* ANSI measured wattage; 25°C ambient; benchtop; lamps base up
A
pp
lication and Performance S
p
ecification Information Sub
j
ect to Chan
g
e without Notification.
C2642UNV
C2642UNV
C2642UNV
C2642UNV
C2642UNV
pp p j g
Performance: Safety:
• Meets ANSI Standard C82.11 • No PCB's
• Meets FCC Part 18 (Non-Consumer), Limits for EMI/RFI
•
C
UL
US
listed (Class P)
• Operating Frequency Range: Above 60 kHz Type 1 Outdoor, Type CC, Type HL
• Auto-Reset Shutdown Circuit per NEMA Recommendations
- Both lamps should be replaced at end of life
- Lamp relights upon insertion in socket
• Suitable for use in air handling spaces when NEC wiring guidelines are followed
• ME version: Input Terminals L N G intended for one supply connection only
Application:
Physical Parameters
Application:
Physical
Parameters
• Minimum Starting Temperature: 0° F, -18° C Overall Length: 4.94"
• Maximum Case Temperature (@ t
c
):
167° F, 75° C Width: 2.31"
• Sound Rated: A Mounting: 4.61"
• Lead configuration: Height: 1.00"
xxx = ME - Multi-Exit Weight: 0.57 lbs
or MES - Multi-Exit with Studs (2" on center) Qty/Carton: 20
• Remote Mounting 12 feet Color: ME/MES-White
• Also operates on 125VDC input, (+)L (-)N Can Material: Metal
Warrant
y
:
y
Universal Lighting Technologies warrants to the purchaser that each electronic ballast will be free from
defects in material or workmanship for a period of 5 years from date of manufacture when properly installed
and under normal conditions of use. Call 1-800-BALLASTx800 for technical assistance.
- Manufactured in North America
- Ballast has plug in wire trap connectors.
- Use 18 AWG solid copper wire, stripped to 3/8".
- Ballast must be grounded in accordance with
national and local electrical codes.
Black
White
One Lamp
Application
Reds
Blues
Black
White
Reds
Yellows
Blues
Two Lamp
Application
Black
White
One Lamp
Application
Red
Blue
Red
Blue
1-800-BALLAST
www.unvlt.com
February 2014