User's Manual

SIRIUS Conductor Tuner 11
Storing Presets
You can store up to 30 total presets
(10 presets per A, B, and C bank) by
assigning them to the number pad.
To set presets, go to A, B or C bank.
You can change the bank by pressing
BAND, and it will display the current
bank in the upper right hand corner of
the display.
Tune to the channel you want to store
and press and hold the appropriate
number (for example, 1) key for 1.5
seconds. For example, to store
channel 001 to digit 1, in bank A:
1. Tune to the channel you want to
store.
2. Select bank A by pressing BAND
until A is in the upper right hand
corner of the display.
3. Press and hold the 1 key until A1
appears in upper right hand
corner of display.
Now channel 001 is stored as one of
your presets. To access this preset,
simply press and release 1.
NOTE: You can override previously
stored presets by saving over
them.
Restoring Factory Default
Press CH + or CH –, or CURSOR
LEFT (W) or CURSOR RIGHT (X) to
navigate to the Factory Restore
screen (see below). Restoring factory
default clears all favorite channel
presets.
1. Press CH + or CH – or CURSOR
UP (S), CURSOR DOWN (T) to
highlight the Factory Restore.
2. Press SELECT. Restore Settings
appears on the wireless
controller’s display.
3. Use CH + or CH – or CURSOR
UP (S), CURSOR DOWN (T) to
select YES. Press SELECT to
reset. This restores all settings
the factory settings. Select NO to
leave the settings as they are and
return to Menu Options.
_
+
SAT
TER
Signal Indicator
Factory Restore?
Yes
No
SIRIUSRadio.book Page 11 Sunday, September 17, 2006 2:24 PM