User's Manual

SIRIUS Conductor Tuner 13
Multi Radio Control
You can control up to two SIRIUS
radios with your remote control. First
you must connect the SIRIUS
Conductor Home Tuner (model SC-
H1). Connect it to your SIRIUS
Conductor radio using an optional 8-
pin DIN cable (not included with your
SIRIUS Conductor. The DIN cable is
included with the SIRIUS Connect
Home Tuner instead.).
After you connect the SIRIUS
Conductor Home Tuner, make sure
to press RESET on your SC-H1W
Tuner (Conductor). This enables
the second radio, then follow the
instructions for your SIRIUS
Conductor Home Tuner to activate
the second radio.
1. To select a second radio, press
and hold for 1.5 seconds, or
press SWAP.
2. To highlight a radio (either 1 or 2),
press CH +, CH –, or CURSOR
UP (S), CURSOR DOWN (T).
3. Press SELECT or DIRECT to
select the highlighted radio.
When two radios have been set up,
the display shows a superscript
number to indicate which radio is
shown, as in the example below,
where the LCD displays radio 1:
Press SWAP to switch between the
active radios displayed on the screen.
CH NAME
1
Artist Name
1
Song Title
A
1
001
SIRIUSRadio.book Page 13 Sunday, September 17, 2006 2:24 PM