User's Manual
18 SIRIUS LCD Wireless Controller
Setting Up Your LCD
Wireless Controller
The first time you power up your
wireless controller, you need to pair it
with the SIRIUS Satellite Radio.
1. The remote’s LCD displays sirius
radio has not been setup.... push ok
to set up...
2. Press OK. The remote displays
Push button on Sirius radio to
begin setup.
3. Press the RESET button on the
radio. The remote displays Push
Button on Sirius Radio again to
finish.
4. Press the RESET button again.
The remote displays Success!
Radio and Remote are now paired.
You can now use your remote to
control your SIRIUS Satellite
Radio.
Re-Pairing or Adding
Another Wireless
Controller
After initial setup of your wireless
controller, you may need to re-pair it
with your SIRIUS radio, or to add
another RF signal repeater to extend
your RF range of operation. For
example, if you want to use a lamp
module by another manufacturer to
act as a communication node to the
Sirius radio, you can add that node to
the Zwave network.
In order to re-pair your wireless
controller with the radio or other node,
or add another controller, you must
add a node to the network.
NOTE: When pairing your wireless
controller with the radio, you must
first delete the existing node
before adding a new one.
However, if you are adding
another node to obtain longer RF
range, you do not have to delete
the existing node.
Adding a Node
1. Press and hold SET until the LCD
displays Initial Setup.
2. Press Scroll Left or Scroll Right
until the LCD displays SIRIUS
Setup. Press OK.
3. The LCD displays Nodes. Press
OK.
4. The LCD displays Add Radio to
Network. Press OK.
5. The LCD displays Push Button on
Radio. Press RESET on the radio
or the button on the other
manufacturer's node.
NOTE: You must be within two feet of
the radio when adding a node.
6. The LCD displays Successful and
then returns to the Nodes screen.
Press SKIP BACK to
command your PVR to
instantly replay the last
7 seconds of a program
you are watching.
Use QUICK SKIP to
command your PVR
SKIP FORWARD in the
program you are
watching.
Press LIVE to return to
watching live TV.
Use REC, REW, PLAY,
FFWD, STOP, and
PAUSE to control a
VCR, DVD player, or a
PVR (after selecting a
desired device).
Key Function
SIRIUSRadio.book Page 18 Sunday, September 17, 2006 2:24 PM