User's Manual

SIRIUS LCD Wireless Controller 19
Deleting a Node
1. Press and hold SETUP until the
LCD displays Initial Setup.
2. Press Scroll Left or Scroll Right
until the LCD displays SIRIUS
Setup. Press OK.
3. The LCD displays Nodes. Press
OK.
4. The LCD displays Add Radio to
Network. Press Scroll Left or
Scroll Right until the LCD displays
Delete Radio From Network.
5. The LCD displays Push Button on
Radio. Press RESET on the radio.
NOTE: You must be within two feet of
the radio when deleting a node.
6. The LCD displays Successful and
then returns to the Nodes screen.
Adding a Device
You can add up to 12 devices to
control with your SIRIUS LCD wireless
controller. See the list below for the
devices you can add.
NOTE: You must set up your audio
device so that your SIRIUS LCD
wireless controller controls the
volume and mute functions in
order for these features to work
properly. See “Controlling Your
Stereo’s Volume and Setting Its
Audio Source Using Your
Wireless Controller” on page 8.
NOTE: While adding a device, the
long name for the device scrolls
across the LCD screen. At all
other times, the LCD displays the
short name for the device.
Adding a Device by Searching
for Its Code
To add a device by searching for its
code, perform the following steps.
1. Press and hold SET until the
remote displays Initial Setup.
2. Press OK. The remote displays
Add Device. The bottom line of the
display lists Receiver as the first
device you can add. Either press
OK or use Scroll Left () or
Scroll Right () to select another
device to add.
NOTE: If you cannot find the working
code or brand for your receiver,
try the codes for Amplifier, and
then Misc. Audio. Press Scroll Left
() or Scroll Right () to search
for the device when the LCD
displays Add Device.
3. The remote displays the device
name on the top line and Code
Setup on the next line.
4. Press Scroll Left () or Scroll
Right () to scroll through the
manufacturer’s codes for your
device type (i.e., receiver). When
you have selected the correct
code, the wireless controller turns
off the device.
5. Press OK to save the code for
your device.
Short
Name
Long Name
RCV RECEIVER
TV TV
CBL CABLE BOX
SAT SATELLITE
DVD DVD
VCR VCR
MIS MISC AUDIO
CD CD
HOM HOME CTRL
LDP LASER DISC
CA CASSETTE
MC MEDIA
AMP AMPLIFIER
Short
Name
Long Name
SIRIUSRadio.book Page 19 Sunday, September 17, 2006 2:24 PM