User's Manual

22 SIRIUS LCD Wireless Controller
input label is displayed in the
bottom line (for example, Input 1).
7. Press Scroll Left () or Scroll
Right () to find the input you
want to choose.
8. Press OK to save the input.
9. The remote displays YOUR INPUT IS
NOW PROGRAMMED PUSH OK TO EXIT.
10. The remote displays SIRIUS Key Now
Automatically Changes Input.
Now when you press your SIRIUS
key, your remote control automatically
selects your audio source (input).
Replacing a Device
This feature allows you to replace an
existing device in the remote’s
programming with a new device.
To replace an existing device, perform
the following steps:
1. From INITIAL SETUP press OK. The
remote displays ADD DEVICE. Use
SCROLL LEFT or SCROLL
RIGHT to go to REPLACE
DEVICE.Press OK.
2. The remote displays REPLACE
WHAT? Press Scroll Left () or
Scroll Right () to go to a device
you want to replace. Press OK.
3. The remote displays With What
Device. Press Scroll Left () or
Scroll Right () to go to a
replacement device. Press OK.
4. The remote displays the code
setup and default manufacturer’s
code for the replacement device.
See “Adding a Device” on
page 19.
5. Once the device setup is
complete, Press OK. The remote
returns to the Replace Device
screen.
Deleting a Device
This feature allows you to delete a
device you have programmed into the
remote. To delete a device, follow the
steps below:
1. From INITIAL SETUP press OK. The
wireless controller displays ADD
DEVICE. Press Scroll Left () or
Scroll Right () to go to DELETE
DEVICE. Press OK.
2. The remote displays the device
name and its code (for example,
Cable Box 1376). Press Scroll
Left () or Scroll Right () to
view the codes of other devices
you have set up.
3. To delete the displayed device,
press OK. The remote displays
ARE YOU SURE? IF SO PUSH OK. Press
OK.
4. The remote displays the name of
the deleted device (for example,
Cable Box 1376 Has Been Deleted).
5. Press OK to return to the Delete
Device screen, or SET to exit.
Viewing a Device Code
You can use this feature of your
wireless controller to view the codes
that have been setup for your devices.
The LCD displays the codes you have
programmed.
To view a device code, perform the
following steps:
1. From INITIAL SETUP press OK. The
wireless controller displays ADD
DEVICE. Press Scroll Left () or
Scroll Right () to go to VIEW
CODE. Press OK.
2. The first line of the LCD displays
the current device type in the
middle and two other devices on
either side of the current device.
The second line displays the long
device name and the third line
displays the 4-digit code number
SIRIUSRadio.book Page 22 Sunday, September 17, 2006 2:24 PM