User's Manual

SIRIUS LCD Wireless Controller 23
(for example 0010) programmed
for the current device.
3. Press Scroll Left () or Scroll
Right () to view codes of other
devices you have set up.
4. After viewing the codes, press OK
or SET to exit the VIEW CODE
mode.
Replacing a Device
This feature replaces an existing
device with a new device in your
wireless controller’s programming.
NOTE: The new device replaces and
overwrites all settings of the
current device (Key Magic,
Learning, and all other user-
programmed features).
To replace one device with another,
perform the following steps:
1. From INITIAL SETUP press OK. The
wireless controller displays ADD
DEVICE. Press Scroll Left () or
Scroll Right () to go to Replace
Device. Press OK.
2. The LCD displays REPLACE WHAT?
on line 1 and the current device
type in the middle of line 2.
Press Scroll Left () or Scroll
Right () to scroll to another
device type to replace.
3. Press OK to select the device
type to replace. The LCD displays
With what device? On line 2, the
LCD displays the current device
(for example, RCV). Press Scroll
Left () or Scroll Right () to
scroll to another device type to
replace the current device.
4. When you have selected the
replacement device, press OK.
5. The LCD displays the device
code and its default ID. For
example, for a cable box the LCD
displays Cable Box, Code Setup,
1376. Press OK to complete the
code setup and store the new
device.
Setting Volume Control
Volume Lock allows you to control the
volume through another device when
you are not in the SIRIUS mode. You
can use Volume Lock when you are
using the wireless controller to control
another infrared (IR) device. For
example, if you use your Sirius
controller to watch DVDs and your
DVD audio is through your stereo, you
can set the volume to be controlled by
your stereo even when you're
controlling the DVD player, regardless
of which mode you are using. By
default, all your devices have
independent volume control. You can
perform Individual Volume Unlock on
a selected device to set its volume
control for independent operation.
Locking Volume Control to
Other Devices
You can set a device, such as a
receiver, to control volume. To set
Volume Lock, perform the following
steps:
1. From INITIAL SETUP, use Scroll Left
() or Scroll Right () to access
ADVANCED SETUP. Press OK.
2. The wireless controller displays
Set Volume control. Press OK.
3. The wireless controller displays
Lock Volume. Press OK.
4. The wireless controller displays
USE < > TO SELECT VOLUME SOURCE
THEN PRESS OK.
5. When you press any key, the
wireless controller displays the
name of the device to be locked
and its code (for example, Lock
Volume to Receiver 1158).
6. Press Scroll Left () or Scroll
Right () to select the device to
be locked. Press OK.
7. The wireless controller displays
the name of the device that you
have locked volume control to (for
SIRIUSRadio.book Page 23 Sunday, September 17, 2006 2:24 PM