User's Manual

SIRIUS LCD Wireless Controller 25
mode for the key you wish to
copy.
7. The remote displays Find
Destination Key and Push OK. Any
key except SET, SIRIUS, Scroll
Left (), Scroll Right (), and
OK is a valid destination key.
Press OK.
8. The remote displays Key Mover
Saved.
9. The remote displays Push OK to
add another Push Set to exit. If
you press OK, the remote returns
to step 3 above, Find Source
Mode.
Deleting Copied Keys
You can delete all copied keys in a
single mode from Key Mover. You can
also delete a single copied key.
Deleting All Copied Keys
To delete all Key Mover keys within a
single mode, perform the following
steps:
1. From the ADD KEY MOVER screen,
press Scroll Left () or Scroll
Right (). The remote displays
DELETE KEY MOVER. Press OK.
2. The wireless controller displays
FIND MODE PUSH OK. On the bottom
line, the device name is displayed
(for example, TV).
3. Press Scroll Left () or Scroll
Right () to find the mode you
wish to delete all copied keys
from. Press OK.
4. The wireless controller displays
Select Key to Delete or OK to
Delete All. If you wish to delete a
single key, go to step 1 in
“Deleting a Single Learned Key”.
Press OK.
5. The remote displays Deleting All
Push OK to Confirm. Press OK.
6. The remote displays All Moved
Keys Deleted Push OK to Delete
More. Press OK to delete more
keys, or SET to exit.
Deleting a Single Key Mover
Key
To delete a single Key Mover Key,
follow steps 1-3 above, then perform
the following steps:
1. The remote displays Select Key
to Delete or OK to Delete All.
Press the key to delete.
2. The remote displays KEY DELETED
PUSH OK TO DELETE ANOTHER. Press
OK to delete another copied key,
or press SET to exit.
Using Key Macros
Key Macros allow the user to program
a series of keystrokes to a single
button. For example, you can program
a Key Macro on the POWER button
that turns on and off all of your home
entertainment equipment with a single
press of the POWER button. The
general Key Macro is not available in
the Sirius mode.
NOTE: Macro programming overrides
the key’s original function in all
modes. However, you can access
the key’s original function by
pressing and releasing SET, then
the key where the macro is
assigned. The key then sends its
original function, not the macro.
Adding a Key Macro
Description: To add a new key macro
to the remote’s programming perform
the following steps:
1. From ADVANCED SETUP, press
Scroll Left () or Scroll Right
() to find KEY MACRO. Press OK.
2. The remote displays ADD KEY
MACRO. Press OK.
3. The remote displays SELECT
MACRO KEY. Select any key but
Set, SIRIUS, Scroll Left (),
SIRIUSRadio.book Page 25 Sunday, September 17, 2006 2:24 PM