User's Manual

28 SIRIUS LCD Wireless Controller
Excluding a Node or Radio from
the Network
To exclude, or delete, a node or radio
from the network, perform the
following steps:
1. Press and hold SET until the LCD
displays Initial Setup.
2. Press Scroll Left () or Scroll
Right () until the LCD displays
SIRIUS SETUP. Press OK.
3. The LCD displays Nodes. Press
OK.
4. The LCD displays Add Radio to
Network. Press Scroll Left () or
Scroll Right () until the LCD
displays Delete Radio From
Network. Press OK.
5. The LCD displays Push Button on
Radio. Press the Reset button on
your Sirius Conductor SC-H1W
tuner or third-party node.
6. The LCD displays successful
when you have successfully
deleted (excluded) the radio.
7. After successful deletion, use
NETWORK RESET to execute a
reset. The radio or node is now
excluded form the network (See
“Network Reset” on page 27.).
Including a Third-Party
Manufacturer Node in the
Network
To increase the RF range of
communication to your SIRIUS radio,
you can include a third-party
manufacturer node in the network. To
include a third-party node in the
network, do the following:
1. Go to SIRIUS SETUP and select ADD
RADIO TO NETWORK.
2. See “Adding a Node” on page 18.
Replicating a Remote Control
By replicating a remote control, you
can use another remote control on the
same SIRIUS radio (creating a
secondary remote). Perform the
following steps:
1. From SETUP, go to REMOTE COPY.
Press OK.
2. The LCD displays TRANSMIT
NETWORK AND DATA. Press
Scroll Left () or Scroll Right
() to get to TRANSMIT NETWORK
INFO ONLY. Press OK.
3. The LCD displays Sending until
replication has finished.
4. The LCD displays Successful.
Remote Copy (Receive a Copy)
If you have another remote control you
want to use on the same SIRIUS
radio, perform the following steps:
1. From SIRIUS SETUP, go to REMOTE
COPY.
2. The LCD displays TRANSMIT
NETWORK AND DATA. Press Scroll
Left () or Scroll Right () to
get to RECEIVE A COPY.
3. Press OK to receive a copy of the
network information.
4. The LCD displays RECEIVING until
the remote completes the
replication process.
5. The LCD displays Successful.
NOTE: Copying the remote control to
use with the same Sirius Radio
may negatively impact
performance by slowing down
data transmission.
To use the Sirius remote to
replicate a third-party
manufacturer’s remote, follow the
same steps shown above
(“Remote Copy (Receive a
Copy)”). This causes the Sirius
remote to be part of that network
and also slows down performance
SIRIUSRadio.book Page 28 Sunday, September 17, 2006 2:24 PM