User's Manual

NevoConnect NC-50 is a Z-Wave enabled base station
that allows non-line of sight control of infrared and serial
devices along with sensing of a device’s power state via
video or voltage sensors.
NevoConnect NC-50 Requirements
You will need a NevoConnect NC-50 in each room or
equipment closet containing devices to be controlled. You
must configure each Nevo Controller to send commands
via NevoConnect NC-50. See the NevoStudio Pro Design
Guide for more information.
Unpacking NevoConnect NC-50
NevoConnect NC-50 comes with the following
components:
NevoConnect NC-50s
Power Adapter;
varies depending
on country
NevoConnect
NC-50