User's Manual
2
PAIRING AND UNPAIRING THE
REMOTE
To Pair the Remote
For the remote to work with the SAGE receiver, it must
be paired. Use the following procedure to pair the
remote.
Press the RESET button on
SAGE’s back panel.
On SAGE’s remote, press
the CAMERA and LIGHTS
buttons simultaneously.
SAGE conrms pairing is
successful.
2
1
To Unpair the Remote
To unpair a remote from the SAGE receiver, press
and hold the THERMOSTAT and BACK buttons
simultaneously for 13 seconds. SAGE conrms unpairing
is successful.
Sec.