User's Manual

9
Programming Remote to
Control Another Device
There are three ways that you can program your
DISH remote to control another device, such as a
TV, DVD, Blu-ray Disc™ (BD) Player, VCR, audio
receiver, or amplier:
• Scanning the Remote Database
(see page 10)
• Entering a Code (see page 13)
• Learning Codes (see page 15)
Use Scanning the Remote Database if you do
not know the device code. The receiver scans the
database of codes for the particular device and tries
each code. When you nd one that works, you save
that code.
Use Entering a Code when you know the device
code.
Use Learning Codes when either your device is not
listed under Lookup or when you have scanned the
database and none of the codes worked.
Typically, the TV mode button is programmed to a
TV and the AUX button to a DVD, BD, VCR, audio
receiver, or amplier. However, each of the Mode
buttons are programmable to whatever device you
select.
Each of these procedures is discussed in the
following pages.