Owner's Manual Part 1

Note: An addressed remote control will only work

with the satellite receiver that has the same

remote control address that it is paired with.

PROGRAMMING DEVICE CONTROL

The Star Choice IRC 551 IR and Star Choice URC 551 IR/

UHF Remote Controls are preprogrammed to operate a

Motorola satellite receiver, a Sony TV, a Sony DVD

player, a Panasonic audio amplifier (as an AUX device),

and a Pioneer audio receiver. To control devices other

than the default brands, perform the following steps;

otherwise skip this section.

NOTE: For TV/VCR Combo control, skip this section

and perform the instructions on “Program-

ming TV/VCR Combo Control” on page 13.

Also refer to “Device Table” on page 8 to find

6. On the System Settings screen, use the S, T,

W, X keys to highlight the Installation

Settings option, then press ENTER. (Applies to

DSR 5xx, 207, 317 receivers.)

7. On the Installation Settings screen, use the

S, T, W, X keys to highlight the Remote

Control Address option, then press ENTER.

8. Press and hold the SAT key on your Remote

Control until it flashes.

9. Using the remote control’s number key pad,

enter the dedicated code listed below for each

address:

• ADDRESS 0: Press 00869

• ADDRESS 1: Press 01870

• ADDRESS 2: Press 01871

• ADDRESS 3: Press 01872

• ADDRESS 4: Press 01873

• ADDRESS 5: Press 01874

• ADDRESS 6: Press 01875

• ADDRESS 7: Press 01876

10. Press ENTER to confirm the new remote

address and pair it with the satellite receiver.

The Current Address window will now display

the new address.

Motorola 551 IR_IR-UHF Rev 2.3.fm Page 11 Friday, May 26, 2006 12:27 PM