Owner's Manual Part 1

out which devices can be programmed onto

each device key.

1. Turn on a device and, if applicable, insert

video media, (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding. Highlight or write down

the codes and device you wish to program

before moving on to step 2.

3. Use the “Manufacturer’s Codes (Codes des

fabricants)” starting on page 50) to locate the

type of device and brand name and then enter

the first five-digit code for your device. If

performed correctly, the selected mode key

blinks twice.

NOTE: If the selected mode key emits a long blink,

the entry is invalid. Repeat steps 2 through 3

and try entering the same code again.

NOTE: If the device does not have a POWER key, press

the(Play) key.

5. Repeat steps 1 through 4 for each device you

want the remote control to operate. For future

reference, write down each working device

code in the boxes on the following page.

AUX Code

Device Type:___________________

DVD Code

Device Type:___________________

AUDIO Code

2. On the remote control, press and hold a device

key (i.e., AUDIO, AUX, DVD, SAT, or TV ) until

the selected mode key blinks twice.

4. Aim the remote control at the device and

press POWER once. The device should turn

off. If it does not, repeat steps 2 through 3,

trying each code for your brand until you find

one that works. If it still does not respond, try

searching for the code (see “Searching for

Your Code” on page 14).

Motorola 551 IR_IR-UHF Rev 2.3.fm Page 12 Friday, May 26, 2006 12:27 PM