User's Manual
Table Of Contents
- ATLAS DVR/PVR IR/UHF
- Remote Control
- Télécommande ATLAS ENP IR/UHF
- Users Guide
- Guide d'utilisation
- TABLE OF CONTENTS
- Introduction
- Features and Functions
- Installing Batteries
- Programming Device Control
- Programming TV/VCR Combo Control
- Searching for Your Code
- Checking the Codes
- Using Learning
- Programming Channel Control Lock
- Changing Volume Lock
- Using the Master Power Key
- Re-Assigning Device Keys
- Checking Your Remote’s ID Code
- Changing Your Remote’s ID Code
- Using Your Remote’s RF Functionality
- Clearing Custom Programming
- Troubleshooting
- FCC Notice
- Additional Information
11
5. For future reference, write down each working
device code in the boxes below:
TV/VCR Code
TV Code (if used)
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
theAtlas DVR/PVR IR/UHF Remote after trying all of
the codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for your TV:
1. Turn on your TV.
4. Aim the remote control at your TV/VCR
Combo and press PWR once. The device
should turn off. If it does not respond, repeat
steps 2 through 3, trying each code listed for
your brand until you find one that works. If it
still does not respond, try searching for the
code (“Searching for Your Code” starting on
page 11).
2. On the remote control, press TV once; it blinks
once. Then press and hold SETUP until the TV
key blinks twice.
3. Enter 9 9 1. The TV key blinks twice.
4. Aim the remote control at the TV and press
PWR once.
5. Press CH+ one or more times and stop when
the TV turns off.
NOTE: In the search mode, the remote control sends
IR codes from its library to the selected
device, starting with the most popular code
first.
6. Press SETUP once to lock in the code. The TV
key blinks twice.