User's Manual

13
TIP: Don't forget to keep your remote pointed at the
DIRECTV Receiver! Your remote is receiving
information from the DIRECTV Receiver.
Reset your DIRECTV Remote to factory default settings
You can reset the remote control to factory default settings
which clears all but the DIRECTV mode.
1. Turn on your TV and DIRECTV Receiver.
2. Slide the MODE switch to the DIRECTV position.
3. Press MENU on your remote control, then select
“Parental, Fav's & Setup,” “ System Setup,” a n d
“Remote Control.”
4. Select “Reset Remote.”
5. Follow the on-screen instructions.
ADVANCED REMOTE SETTINGS
In addition to setting up your DIRECTV Remote to control
your TV and other devices the following Advanced Settings
are available: IR/RF Setup, Volume Lock, Set Receiver Mode
and Multi-Box Setup.
IR/RF Setup
Remote Control models RC65R, RC65RB, RC65RX, and
RC65RBRX feature RF (radio frequency) capability. When
you activate the RF feature of your remote control, you can
control your DIRECTV Receiver from anywhere in your
home. You do not need to be in the line of sight of your
receiver to control it.
NOTE: Not all DIRECTV Receivers are RF-capable.
To activate the RF transmitter on your DIRECTV Remote:
1. Turn on your TV and DIRECTV Receiver.
2. Slide the MODE switch to the DIRECTV position.
3. Press MENU on your remote control, then select
“Parental, Fav's & Setup,” “ System Setup,” a n d
“Remote Control.”
4. Select “Program Remote.”
DIRECTV RC65RBX.fm Page 13 Sunday, March 28, 2010 6:56 PM