User's Manual

15
Volume Lock
If you've programmed your DIRECTV remote to control
your TV, this “locks” the VOL +/- and MUTE control to your
TV. In other words, any time you press the VOL +/- or MUTE
keys on your remote, it will adjust the volume through your
TV, regardless of the position of the MODE switch.
If you want the audio for your DIRECTV programs to come
through a component other than your TV (Ex. Stereo), you
can “lock” volume control to that device as follows:
1. Turn on your TV, DIRECTV Receiver and other
component (Ex. Stereo).
TIP: If you have not already done so, first program
your remote to control your TV and then pro-
gram your remote to control your other compo-
nents, Ex. Stereo. See instructions on pages 8
and 10, respectively.
2. Slide the MODE switch to the DIRECTV position.
3. Press MENU on your remote control, then select
“Parental, Fav's & Setup,” “ System Setup,” a n d
“Remote Control.”
4. Select “Program Remote.”
5. Select “Advanced.”
6. Select “Volume Lock.”
7. Select the device you want to control audio (Ex. Stereo
that you’ve already programmed to AV2) and select
“OK.”
8. Follow the on-screen instructions to complete the
process.
DIRECTV RC65RBX.fm Page 15 Sunday, March 28, 2010 6:56 PM