User's Manual

2. Locate the 5-digit code for your DIRECTV

Receiver.

(See page 23.)

3. Power on the DIRECTV Receiver.

4. Slide the MODE switch to the DIRECTV position.

5. Press and hold the MUTE and SELECT keys until the

green light under the DIRECTV position flashes twice,

then release both keys.

6. Using the number keys, enter the 5-digit code. If

performed correctly, the green light under the

DIRECTV position flashes twice.

7. Aim the remote at your DIRECTV Receiver and press

the PWR key once. The DIRECTV Receiver should

turnoff; if it does not, repeat steps 3 and 4, trying each

code for your brand until you find the correct code.

8. For future reference, write down the working code for

your DIRECTV Receiver in the blocks below:

ONSCREEN REMOTE SETUP

Once your remote is setup to work with your DIRECTV

Receiver, you can also set it up to control your TV, DVD,

VCR, Stereo and other equipment.

Program your remote to control your TV:

1. Turn on your TV and DIRECTV Receiver.

2. Slide the MODE switch to the DIRECTV position.

3. Press MENU on your remote control, then select

“Parental, Fav's & Setup,” “ System Setup,” a n d

“Remote Control.”

4. Select “Program Remote.”

5. Select “Setup TV.”

DIRECTV RC65RBX.fm Page 8 Sunday, March 28, 2010 6:56 PM