DIRECTV RC65RX.
DIRECTV RC65RX.fm Page 2 Friday, September 3, 2010 1:47 PM CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Controlling Your DIRECTV® Receiver. . . . . . . .
DIRECTV RC65RX.fm Page 3 Friday, September 3, 2010 1:47 PM INTRODUCTION Congratulations! You now have an exclusive DIRECTV® Universal Remote Control that will control four components, including a DIRECTV Receiver, TV, and two stereo or video components (for example, a DVD, stereo, or second TV).
DIRECTV RC65RX.fm Page 4 Friday, September 3, 2010 1:47 PM FEATURES AND FUNCTIONS Key Charts Press this key… To… Slide the MODE switch to the DIRECTV, AV1, AV2 or TV positions to select the component you want to control. A green LED under each switch position indicates the component being controlled. Press TV INPUT to select the available inputs on your TV. NOTE: Additional setup is required to activate the TV INPUT key. (See instructions on page 18.
DIRECTV RC65RX.fm Page 5 Friday, September 3, 2010 1:47 PM Press this key… To… ACTIVE displays the DIRECTV Active Channel which includes local weather, horoscopes and more! For non-DVR boxes, pressing LIST takes you to the To Do List. For DVR boxes, LIST takes you to the PLAYLIST (recordings). (Not available on all DIRECTV® Receivers.) Press EXIT to exit menu screens and the Program Guide and return to live TV. Press SELECT to choose highlighted items in menu screens or the Program Guide.
DIRECTV RC65RX.fm Page 6 Friday, September 3, 2010 1:47 PM Press this key… To… While watching TV, press CHAN (or CHAN) to select the next higher (or lower) channel. While in the DIRECTV Program Guide or menu, press PAGE+ (or PAGE-) to page up (or down) through available channels in the Guide. Press MUTE to turn the sound off or back on. Press PREV to return to the last channel viewed. Press the number keys to directly enter a channel number (e.g. 207) while watching TV or in the Guide.
DIRECTV RC65RX.fm Page 7 Friday, September 3, 2010 1:47 PM INSTALLING BATTERIES 1. 2. 3. On the back of the remote control, push down on the door (as shown), slide the battery cover off, and remove the used batteries. Obtain two (2) new AA alkaline batteries. Match their +and - marks to the + and - marks in the battery case, then insert them. Slide the cover back on until battery door clicks into place.
DIRECTV RC65RX.fm Page 8 Friday, September 3, 2010 1:47 PM 2. 3. 4. 5. 6. 7. 8. Locate the 5-digit code for your DIRECTV® Receiver. (See page 23.) Power on the DIRECTV Receiver. Slide the MODE switch to the DIRECTV position. Press and hold the MUTE and SELECT keys until the green light under the DIRECTV position flashes twice, then release both keys. Using the number keys, enter the 5-digit code. If performed correctly, the green light under the DIRECTV position flashes twice.
DIRECTV RC65RX.fm Page 9 Friday, September 3, 2010 1:47 PM 6. Enter the brand name of your TV using the on-screen keypad or the number keys on your remote. When the brand appears in the list, highlight it and press SELECT. 7. Enter the model number of your TV using the onscreen keypad or the number keys on your remote. When the model number appears in the list, highlight it and press SELECT. If you don't know the model number, select “I don't know my model.” 8.
DIRECTV RC65RX.fm Page 10 Friday, September 3, 2010 1:47 PM 10. When TV setup is complete, the Program Remote screen will display giving you the option to change your settings or set up the remote to control another device. Program your remote to control a DVD Player, VCR, Audio Equipment, or second TV EXAMPLE : You want to control your DVD player with your DIRECTV remote. You will assign Mode, AV1 to your DVD player. 1. Turn on your TV, DIRECTV Receiver and the device you want to control (Ex.
DIRECTV RC65RX.fm Page 11 Friday, September 3, 2010 1:47 PM 7. Enter the brand name of your device using the onscreen keypad or the number keys on your remote. When the brand appears in the list, highlight it and press SELECT. 8. Enter the model number of your device using the onscreen keypad or the number keys on your remote. When the model number appears in the list, highlight it and press SELECT. If you don't know the model number, select “I don't know my model.” 9.
DIRECTV RC65RX.fm Page 12 Friday, September 3, 2010 1:47 PM 11. When setup is complete, the Program Remote screen will display, giving you the option to change your settings or set up the remote to control another device. Copy existing remote settings to another DIRECTV Remote Once you've set up a DIRECTV Remote to control your TV and other devices, your receiver stores this information.
DIRECTV RC65RX.fm Page 13 Friday, September 3, 2010 1:47 PM TIP: Don't forget to keep your remote pointed at the DIRECTV Receiver! Your remote is receiving information from the DIRECTV Receiver. Reset your DIRECTV Remote to factory default settings You can reset the remote control to factory default settings which clears all but the DIRECTV mode. 1. Turn on your TV and DIRECTV Receiver. 2. Slide the MODE switch to the DIRECTV position. 3.
DIRECTV RC65RX.fm Page 14 Friday, September 3, 2010 1:47 PM 5. 6. Select “Advanced.” Select “IR/RF Setup.” 7. Change remote type from “IR” to “RF” and select “Continue.” 8. Follow the on-screen instructions to complete the process.
DIRECTV RC65RX.fm Page 15 Friday, September 3, 2010 1:47 PM Volume Lock If you've programmed your DIRECTV remote to control your TV, this “locks” the VOL +/- and MUTE control to your TV. In other words, any time you press the VOL +/- or MUTE keys on your remote, it will adjust the volume through your TV, regardless of the position of the MODE switch. If you want the audio for your DIRECTV programs to come through a component other than your TV (Ex.
DIRECTV RC65RX.fm Page 16 Friday, September 3, 2010 1:47 PM TIP: 9. Don't forget to keep your remote pointed at the DIRECTV Receiver! Your remote is receiving information from the DIRECTV Receiver. If Volume Lock was successful, the following message will display. If not, you will be given the options to “Try Again” or “Cancel.” Set Receiver Mode To program your remote to control 2 receivers located in the same room: 1. Turn on your TV and DIRECTV Receiver. 2.
DIRECTV RC65RX.fm Page 17 Friday, September 3, 2010 1:47 PM Multi-Box Setup To program your remote to control 3 or more DIRECTV Receivers in one room: 1. Turn on your TV and DIRECTV Receiver. 2. Slide the MODE switch to the DIRECTV position. Press MENU on your remote control, then select “Parental, Fav's & Setup,” “System Setup,” and “Remote Control.” 4. Select “Program Remote.” 5. Select “Advanced.” 6. Select “Multi-Box Setup.” Follow the on-screen instructions to complete the process. 3.
DIRECTV RC65RX.fm Page 18 Friday, September 3, 2010 1:47 PM SETTING UP THE TV INPUT KEY Once you have setup the DIRECTV® Remote control for your TV, you can activate the TV INPUT key so you can change the “source”—the piece of equipment whose signal is displayed on your TV: 1. Slide the MODE switch to the TV position. 2. Press and hold the MUTE and SELECT keys until the green light under the TV position flashes twice, then release both keys. 3. Using the number keys enter 9-6-0.
DIRECTV RC65RX.fm Page 19 Friday, September 3, 2010 1:47 PM 8. For future reference write down the working code for the component(s) set up under AV1 and AV2 below: AV1: COMPONENT: ___________________ AV2: COMPONENT:___________________ SEARCHING FOR TV, AV1 OR AV2 CODES If you were unable to find the code for your brand of TV or component, you can try a code search. This process may take up to 30 minutes. 1. Turn on the TV or component. Insert a tape or disk if applicable. 2.
DIRECTV RC65RX.fm Page 20 Friday, September 3, 2010 1:47 PM 8. When the TV or component turns off turns off or performs the action you selected in step 5, stop pressing the CHAN key. Then, press and release the SELECT key. NOTE: If the light flashes 3 times before the TV or component responds, you've cycled through all codes and the code you need is not available. You must use the remote that came with your TV or component.
DIRECTV RC65RX.fm Page 21 Friday, September 3, 2010 1:47 PM Press and release the SELECT key. (The green light flashes twice.) NOTE: DIRECTV® Receivers don’t have volume control, so the remote will not allow the user to lock volume to the DIRECTV mode. 4. ACTIVATING AND DEACTIVATING THE RF TRANSMITTER Your DIRECTV Remote Control features RF (radio frequency) capability. When you activate the RF feature of your remote control, you can control your DIRECTV Receiver from anywhere in your home.
DIRECTV RC65RX.fm Page 22 Friday, September 3, 2010 1:47 PM The RF transmitter on your remote control is now deactivated. To reactivate the RF transmitter, See “Activating the RF Transmitter” above. RESTORING FACTORY DEFAULT SETTINGS To reset all the functions of the remote control to the factory defaults (the original, out-of-the-box settings), follow these steps: 1. Press and hold the MUTE and SELECT keys at the same time until the green light flashes twice, then release both keys. 2.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.fm Page 26 Friday, September 3, 2010 1:47 PM Curtis Mathes CXC CyberHome Cytron Daewoo Dell Delta Denon Denstar Diamond Vision Digital Lifestyles Digital Projection Inc.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.fm Page 56 Friday, September 3, 2010 1:47 PM REPAIR OR REPLACEMENT POLICY If the DIRECTV® Universal Remote Control does not function properly, DIRECTV will, at our sole discretion, repair or replace the DIRECTV Universal Remote Control, provided that: a. You are a customer of DIRECTV and your account is in good standing; and b.
DIRECTV RC65RX.fm Page 57 Friday, September 3, 2010 1:47 PM interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Increase or decrease the separation between the equipment and receiver. • Consult the dealer or an experienced remote control/ TV technician for help. This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules.
DIRECTV RC65RX.
DIRECTV RC65RX.
DIRECTV RC65RX.
