NevoQ50 provides fully-customizable control of all of your home theater devices. Its touch-sensitive screen is software-based, so your installer/ integrator can include just those controls you actually use. Before You Use NevoQ50 Please ensure your Nevo Q50 is fully charged before use. NevoQ50 Universal Controller Charging Cradle AC Power Adapter; varies by country To charge your Nevo Q50: 1. Connect the power adapter to the charging cradle and plug the adapter into a wall outlet. 2.
Getting to Know NevoQ50 NevoQ50 offers the following types of controls: Touchscreen: To use the touchscreen, gently touch the buttons that appear on it. If you prefer, slide the stylus from its storage port on the bottom of NevoQ50: Using the stylus, gently tap buttons on the touchscreen to control your home theater and home automation devices. You may prefer to always use the stylus when you are configuring settings. Talk with your installer/integrator for more Stylus information on these settings.
Caring for NevoQ50 Use only the stylus to switch Nevo Q50 on or off. Avoid using sharp objects. Clean your remote with a soft, damp cloth using a gentle, non-caustic cleaner. CAUTION:Do not use a caustic or abrasive cleaner. This may damage the surface of your controller. For more information, contact your installer/integrator: Installer/integrator: attach your business card or business sticker here.
Corporate Headquarters Universal Electronics 6101 Gateway Drive Cypress, CA 90630-4841 www.uei.com International Headquarters Universal Electronics Institutenweg 21 7521 PH Enschede The Netherlands www.uei.
