User's Manual

Nevo
Q50
provides fully-customizable control of all of your home theater
devices. Its touch-sensitive screen is software-based, so your installer/
integrator can include just those controls you actually use.
Before You Use Nevo
Q50
Please ensure your Nevo
Q50
is fully charged before use.
To charge your Nevo
Q50
:
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Power on and dock Nevo
Q50
to begin
charging the battery. If it has not
already been charged, it will take 3-4 hours to fully charge the battery the
first time.
Recharging Nevo
Q50
Nevo
Q50
has a built-in Lithium-ion rechargeable battery. Nevo
Q50
beeps and
displays a warning message when the battery is running low. You should dock
Nevo
Q50
at this time to charge the battery .
You can dismiss the warning message by clicking OK; if you do so and the
battery power becomes critically low,
Nevo
Q50
will beep and display a
critical low battery warning message. You cannot dismiss this message and
should dock Nevo
Q50
immediately.
To dock Nevo
Q50
, simply set the controller in the charging cradle. When it
is correctly docked, the blue light will appear on the bottom of the remote.
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep Nevo
Q50
in its charging cradle when you
are not using it.
Nevo
Q50
Universal
Controller
Charging Cradle
AC Power
Adapter; varies
by country