User's Manual

ManualsBrandsUniversal Electronics ManualsElectronicsInsignia cTV RF Remote 2010

www.insi

nia

roducts.com

Getting Started NS-32E859A11/NS-42E859A11

Remote control

# Button Description

(power)

Press to turn on your TV. Press again to put your TV in standby mode.

When your TV is in standby mode, power still flows through it. To

completely disconnect power, unplug the power cord.

DVD

Press to control a DVD player. You must program the remote control

before this button works. For more information, see “Programming your

universal Insignia remote control” on page 27.

TV Press to put the remote in TV mode.

APPS Press to open the Apps screen in the on-screen menu.

TiVo Press to open the on-screen menu.

GUIDE

Press to open the program guide. For more information, see “Displaying

additional information” on page 35.

SELECT Press to confirm selections or changes.

! " # $

Press to move left, right, up, or down in on-screen menus.

ZOOM

Press to select the aspect ratio. For more information, see “Adjusting the

video settings” on page 40.

EXIT Press to close the on-screen menu.

(thumbs down)

Press to decrease the thumbs rating by 1 thumb.

In the channel list, press to remove a highlighted channel from the

favorite list.

In the on-screen keyboard, press to switch to lowercase letters.

VOL+/VOL– Press to increase or decrease the volume.

FAV

Press to open the favorite channel list. For more information, see

“Setting up the channel and favorite channel lists” on page 63 and

“Viewing a favorite channel” on page 64.

MUTE Press to mute the sound. Press again to restore the sound.

/SLOW

Press to enter slow motion playback in TV VOD mode (watching Netflix

and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For

more information, see “Programming your universal Insignia remote

control” on page 27.

Press to turn the video window on or off. For more information, see

“Turning the video window on or off” on page 43.

(replay)

Press to jump back eight seconds in TV VOD mode (watching Netflix and

CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For

more information, see “Programming your universal Insignia remote

control” on page 27.

(pause)

Press to pause playback in TV VOD mode (watching Netflix and

CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For

more information, see “Programming your universal Insignia remote

control” on page 27.

Summary of content (23 pages)

PAGE 1
Getting Started NS-32E859A11/NS-42E859A11 Remote control # Button 1 (power) 2 DVD Description Press to turn on your TV. Press again to put your TV in standby mode. When your TV is in standby mode, power still flows through it. To completely disconnect power, unplug the power cord. Press to control a DVD player. You must program the remote control before this button works. For more information, see “Programming your universal Insignia remote control” on page 27.
PAGE 2
NS-32E859A11/NS-42E859A11 # Button 18 19 (fast-reverse) (stop) 20 $ (play) 21 CLEAR 22 AUDIO 23 PICT 24 STB 25 AUX 26 INPUT 27 LIVE Description # Button Description Press to fast-reverse in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR. For more information, see “Programming your universal Insignia remote control” on page 27. Press to stop playback in TV VOD mode (watching Netflix and CinemaNow) or when using a DVD player, Blu-ray player, or DVR.
PAGE 3
Getting Started NS-32E859A11/NS-42E859A11 Using the remote control Making connections Installing the remote control batteries Connecting the power To install the remote control batteries: 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. To connect the power: • Plug the power cord on back of your TV into a power outlet. Cautions • • 2 Insert two AA batteries into the battery compartment.
PAGE 4
NS-32E859A11/NS-42E859A11 Turning on your TV for the first time Per Dana’s instructions, the graphics and text in this section were based on comments for the QSG. Please verify if additional changes need to be made. Note Getting Started 3 Press ! or " to highlight Set up this TV, then press SELECT. The Remote Control Connection screen opens. Welcome A for retail mode You are about to begin Guided Setup, which prepares the Insignia HD TV for your use. This typically takes less than 10 minutes.
PAGE 5
Getting Started NS-32E859A11/NS-42E859A11 5 The Network Setup screen opens. Press ! or " to highlight your network connection type, then press SELECT and follow the on-screen instructions to set up your network and run the network speed test. 7 If you connected to a network in Step 5 and a software update is available, the Update in Progress screen opens. Follow the on-screen instructions to install the software update.
PAGE 6
NS-32E859A11/NS-42E859A11 9 The Congratulations screen opens. Press TiVo to enjoy your new TV. Getting Started Programming your universal Insignia remote control Note Congratulations! To use the on-screen setup for your remote control, the remote control must be in RF mode. For more information, see “Setting up your Z-Wave remote control” on page 102. You TV is now set up. Press TIVO at any time to access the TV’s menu and On Demand shows. Press LIVE at any time to watch television.
PAGE 7
Getting Started NS-32E859A11/NS-42E859A11 3 Press ! or " to highlight Devices, then press $ or SELECT. control that you want to program (DVD, STB, DVR, or AUX), then press $ or SELECT. In R3 comments, Dana said to add DVR. Vendor says to delet it. Please advise.
PAGE 8
NS-32E859A11/NS-42E859A11 7 Repeatedly press $ to highlight the list of brands, press ! or to highlight the brand of your device, then press SELECT. Vendor said to move the following note to follow step 8. But this note applies to brands as well as models. So it seems that is should stay with the step it first applies to. Please advise. " 10 Press ! or " to highlight Yes, continue, then press SELECT. The following screen opens.
PAGE 9
Getting Started NS-32E859A11/NS-42E859A11 We changed the following graphic based on Dana’s comments. Vendor wants move HDMI1 up to the first item in the list and highlight it. Then move Component to just above VGA. Please advise if additional changes need to be made. Step 5: Select Input You can use the button lock to assign the power and volume controls to the device you select, regardless of the operating mode.
PAGE 10
NS-32E859A11/NS-42E859A11 3 Press ! or " to highlight Devices, then press $ or SELECT. Getting Started 5 Press ! or " to highlight the button on your remote control that you want to lock (power or volume), then press $ or SELECT.
PAGE 11
Getting Started NS-32E859A11/NS-42E859A11 Resetting all the remote settings 4 Press ! or " to highlight Remote control setup, then press You can reset the remote control to the factory defaults. This will clear all the programming and button lock settings. To reset all the remote settings: 1 Press TiVo. The Home screen opens. Press ! or " to select Settings, then press $ or SELECT. 2 Press ! or " to highlight Settings, then press $ or SELECT.
PAGE 12
NS-32E859A11/NS-42E859A11 Understanding the basics Turning your TV on or off To turn your TV on and off: 1 Make sure that the power cord is already connected to a power outlet. 2 Press (power) to turn on your TV. The power indicator LED turns blue. 3 Press (power) again to turn off your TV. Your TV enters Standby mode and the power indicator turns red or purple, depending on the TV power on mode you select. For more information, see “Setting the TV power on mode” on page 89.
PAGE 13
Getting Started NS-32E859A11/NS-42E859A11 Using the on-screen keyboard The keyboard screen lets you create custom labels (names) for input sources or channels. Name HDMI 4 To use the remote control shortcuts: • Press on your remote control to add one space to the right of the cursor in the text entry area. • Press on your remote control to delete one character to the left of the cursor in the text entry area. • Press Enter a name for the input and then press RIGHT to choose Done entering name.
PAGE 14
NS-32E859A11/NS-42E859A11 Getting Started Adjusting the volume To adjust the volume: • Press VOL+ or VOL– to increase or decrease the volume. • Press MUTE to turn off the sound. Press MUTE again to turn the sound back on. Displaying additional information To view channel information: • Press INFO to view an information banner. The information banner shows the current program information such as channel number, video input source, and resolution.
PAGE 15
Appendix NS-32E859A11/NS-42E859A11 Setting up your Z-Wave remote control 2 Press and hold and on the remote control for about five seconds. The Remote Control Setup Complete screen opens and the remote control LED blinks four times. Per Dana, no additional changes should be made to the Z-Wave remote control section. The remote control that came with your TV is different from a traditional IR remote control. Using Z-Wave technology, your remote control allows RF communication with your TV.
PAGE 16
NS-32E859A11/NS-42E859A11 Toggling between IR and RF communication Once your remote control is added to the TV ZWave network, you can use Z-Wave RF communication to control your TV. However, you can also switch to IR communication, which requires you to point the remote control toward the remote control sensor when you try to control your TV. RF communication with your TV does not require you to point the remote control toward the remote control sensor on the front of your TV.
PAGE 17
Appendix NS-32E859A11/NS-42E859A11 3 Press SELECT to complete the reset. Z-Wave Network Reset Your Z-Wave network has been successfully reset. Any devices you wish to use on the Z-Wave network must be added again. OK To add your TV to other Z-Wave network: • Refer to the user manual of the Z-Wave device (Primary Controller) for programming information. • When the Z-Wave device is in programming (setup) mode, press CH and CH on the TV at the same time to add your TV to the Z-Wave network.
PAGE 18
NS-32E859A11/NS-42E859A11 • Every Z-Wave enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate “RF dead-spots.” Appendix 2 Enter 9 7 5. The LED blinks twice. Notes • Advanced remote control programming • If more than 10 seconds pass between button presses, the remote control exits programming. If the LED displays one long flash instead, replace the batteries.
PAGE 19
Appendix NS-32E859A11/NS-42E859A11 3 Press the mode button that you want to remove the learned button from, then press the button containing the learned function to be deleted, twice. The LED blinks twice and programming ends. Deleting all learned buttons in a specific mode Notes • • If more than 10 seconds pass between button presses, the remote control exits programming. If the LED displays one long flash instead, replace the batteries.
PAGE 20
NS-32E859A11/NS-42E859A11 Controlling the remote control backlight Appendix 3 Press ! or " to highlight Devices, then press $ or SELECT. Settings Your remote control has a backlight that can turn on when you press a button. You can set the amount of time your want the backlight to stay on before it automatically turns off.
PAGE 21
Appendix NS-32E859A11/NS-42E859A11 5 Press ! or " to highlight Backlight, then press $ or SELECT. Dana said not to change the following graphic. Remote control setup DVD button 10:00 PM STB button AUX button Power button Volume button Channel buttons Set the delay before the backlight on the remote control automatically turns off. Current Settings: 3 seconds Backlight Reset all remote settings 6 Press ! or " to highlight the amount of time you want the backlight to stay on, then press $ or SELECT.
PAGE 22
Legal Notices Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Two-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 23
Legal Notices NS-32E859A11/NS-42E859A11 Legal notices HDMI HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.