Specifications

Display (Litres) Resolution
Set-up Modes
Compac Industries Ltd.
Page 26
www.compac.co.nz
Display (Litres) Resolution
For standard dispenser/pumps, high flow dispenser/pumps & bulk metering,
different resolutions are often required:
Display
Resolution
Sr setting
on k factor
switch
Litres Display
resolution
Max
presetable or
fill amount
Standard (default)
0.000
0.00
970 L
Hi-Flow
0.00
0.00
9700 L
Bulk-metering
0.0
00000.0
0
000000
000000[0]
[0] is not
displayed
As well as displaying the decimal point, a full colon will show
on the display after 'power on', until the first transaction is started (i.e. the
display shows „:0.0‟ until the first new transaction begins).
The display resolution does not affect the price display, which will always
display to a resolution of 0.01 dollars.
Setting the Display Resolution
Refer to C4000 Set-Up K Factor Switch Settings (see page 21)
Step
ACTION
RESULT
1
Ensure that the nozzles are
hung up
Dispenser in idle state
2
Press and release the „K‟
Factor switch continuously
until the Litres resolution is
displayed
The price display indicates „Sr‟
and the Litres Resolution is
displayed as “0.00” (standard
resolution on 5-digit display)
3
Press and hold the „K‟ factor
switch.
The decimal point will begin to
move.
4
When the resolution
(decimal point) is correct,
release the „K‟ Factor
switch.
The C4000 will
reset itself if the „K‟ factor
switch is left for more than 10
seconds.