Specifications

Set-up Modes
Parameter Switch
Compac Industries Ltd.
Page 35
www.compac.co.nz
Setting the Price for Quad (four) Hose Configuration
Step
ACTION
RESULT
1
Ensure that the nozzles are
hung up
Dispenser in idle state
2
Press and Hold the
Parameter switch operated
until the “Price per litre” is
displayed.
The Price for hose 1 is displayed
as „PX.XXX‟ and „Pr1‟ is
displayed on the price display.
3
Press and hold the
Parameter switch.
A digit, of the displayed „Price per
litre‟, will begin to increment.
4
When the digit is correct,
release the Parameter
switch.
5
Repeat steps 3 and 4 for
each digit of the „Price per
litre‟.
The C4000 will
reset itself if the Parameter switch
is left for more than 60 seconds.
Continue for other hoses
6
Press and release the
Parameter switch 8 or more
times in quick succession
The „Price per litre‟ for the next
hose is displayed as „PX.XXX‟.
„Pr2‟, Pr3‟ or „Pr4‟ is displayed on
the price display.
7
Repeat steps 3 to 5 above.
If a Compac Central Controller, EFTPEC, Task forecourt
controller, or Compac Commander is used, the price must be set to zero (0) at
the pump/dispenser. The price can then be set at the Controller. This applies
to all configuration display options.
The dispenser/pump will stop when the dollar amount reaches:
$999.99 (high-flow $9999.9) or the litre amount reaches 999.99l (high-flow
9999.9l) whichever occurs first.