Operation Manual

To Re-Activate Channel Control Lock:

On the remote control, press CABLE once.

Then press and hold SETUP until the

CABLE key blinks twice, then release SETUP.

Enter 9 - 7 - 3. The CABLE key will blink

twice.

Press CH+ once. The CABLE key will blink

twice.

4. Now, regardless of what mode you select

(that is, TV, DVD, or CABLE), only the chan-

nel control capability of your cable converter

will be accessible.

NOTE: This feature does not affect the AUX

mode.

USING THE MASTER POWER KEY

The Cox Universal Remote Control is equipped with a

unique feature that allows you to sequentially turn on

or off all your home entertainment devices with a single

key press as follows:

1. Point the remote control at the devices.

Press and hold MASTER POWER for 3 seconds

to sequentially turn on or off all home

entertainment devices.

Depending on what mode is currently

selected, the remote control will send IR com-

mands to the devices in the following order

For example, if TV is selected, pressing and

holding MASTER POWER for 3 seconds will

turn off the DVD, an auxiliary device, and the

cable converter.

Start Mode Device On/Off End Mode

AUX Cable, TV, DVD CABLE

DVD Auxiliary, Cable, TV CABLE

TV DVD, Auxiliary, Cable CABLE

CABLE TV, DVD, Auxiliary CABLE

M7820BP1.indd 15 3/13/2007 3:54:00 PM