Datasheet

222222
K5201
VM116: p41
VM120: p37
VM138: p41
VM146: p36
Light control
K8017
Low, mid and high channels. Sensitivity adjustment per channel.
• LED indication per channel.
• Attractive translucent enclosure.
• Microphone included.
• Noise suppressed according to EN55015.
• operating voltages: 110-125 or 220-240Vac (50/60Hz)
• max. load: 200W per channel (100W @ 110-125Vac)
• only suited for incandescent light bulbs
• dimensions: 155 x 45 x 160mm / 6.1 x 1.8 x 6.3”
K8062
this unit can control DMX fixtures using a PC and
USB interface. test software and “DMX Light Player”
software is included, a DLL is provided to write your
own software. optional 9V battery needed for stand
alone test mode
• dimensions: 106 x 101 x 44.5mm / 4.2 x 4 x 1.75”
K2601
Flashing light effects for discos.
• Make your own snapshots and “lightning” light effects.
• Flash frequency adjustable from 2 to 20Hz.
• power supply: 220V - 240V AC
• PCB dimensions: 87 x 65mm / 3.4 x 2.6”
Sixteen different programs and seven outputs make this light computer a unique showpiece.
• This kit can find applications in party lighting, discotheques, advertisement lighting, signalling, etc.
• To enhance the spectacle further, an unlimited number of circuits can be connected together to work synchronously.
• Moreover, two programs are provided which are specially adapted to operate two light computers in cascade.
• 7 triac outputs: 1.5A max.
• supply voltage for the lights: 24VAC to 240VAC
• supply voltage of the circuit: 7.5 - 9VAC / 250mA
• 16 programs
• speed controllable
• input for external clock
• PCB dimensions: 134 x 79mm / 5.3 x 3.1”
LIGHT COMPUTER
K8044
this kit has 10, 12V/400mA outputs to control cold-cathode fluorescent lamps, light
bulbs, LED’s and “solid state” relays, .... for use with advertisement lighting, party
lights, eye-catchers, in the disco.... 10 pre-programmed selectable light patterns with a
push button. number of used channels is adjustable. adjustable speed. LED indication
for every output. 12V operation possible for use in cars. the last used lighting effect is
saved in non-volatile memory. options: . adapter (90 - 260V AC input to 12V DC output/
5.8A): PSS1255. power supply for cold-cathode fluorescent lamps: FLPS (300mm) or
FLPS1 (100mm). cold-cathode fluorescent lamps: FL(xx) - (100 or 300mm). “solid-
state” relays for controlling large loads (lamps): VR25SS1A (1 x NO, 240V / 25A) or
VR3SS1A (1 x NO, 240V / 3A). also available in mounted version: VM120
power supply: 12V DC
• consumption: max. 4A
• outputs: 12V DC / 400mA per channel (total : max 4A)
• dimensions: 140 x 100 x 27mm / 5.5 x 3.9 x 1.1”
K8088
ideal for use with flexible LED light lights strips, ex. LDB1-
HS3027AC, CHLS4RGB
• suited for both incandescent bulbs and LEDs.
K8072
This Kit allows you to control a relay by means of the well-known DMX512 protocol.This
protocol was developed by USITT in 1986 to control dimmers, scanners, moving-head
spots and other lighting devices with a simple wiring. In some cases, a simple ON/OFF
selection is desired.
• This is where this K8072 comes in.
• It is actually a bus-controlled power driver.
• The relay will be activated when the DMX value of the set channel equals 140 or more
and turns off when the value is 120 or less.
• Together with our K8062/VM116, a computer-controlled automation will be very easy
to build.
K5201
POPULAR
PRODUCT
mounted version
mounted version
mounted version
mounted version
K8017
3-channel sound light with microphone
K8088
Rgb controller
K8072
Dmx-controlled relay switch
K8062
Usb controlled dmx interface
K8044
12v, 10-channel light effect generator
K260 1
Stroboscope