Datasheet

242424
VM121: p40
VM122: p40
Transmitters & receivers
K8051
The K8051 15-channel IR Remote Stick
features a sleek designer enclosure with
just 2 buttons, yet it provides access to
a stunning 45 channels (3 addresses
with 15 channels each). The built-in ‘all
clear’-function allows the user to turn-off
all channels of the current address at the
same time.
• Channel and address selection is
straightforward and easy.
• Even in total darkness you can select the
correct channel and operate the remote.
• compatible with most current and
upcoming Velleman IR kits: K6712 IR
dimmer, K6713 1-channel IR receiver,
K8046 8-channel touch screen, K6711
/ K8050 addressable 15-channel IR
receiver. single button channel selection
and operation. code is recognised by
most learning remotes
• range: up to 20m (K8050 / indoors)
• power supply: 2 x 1.5V AAA batteries
(not incl.)
• low power consumption
• dimensions: 160 x 27 x 23mm / 6.3 x
1.1 x 0.9”
K6501
This kit makes it possible to turn up to three devices on or off over the
telephone.
• It is also possible to check the condition of a switch (open or closed).
• Example : when you are away on holiday, you may switch the lights on
and off from time to time, check the alarm or turn on the heating before
returning home.
• A major advantage of this circuit lies in the fact that audio signals are used
to tell whether a specific output has been turned on or off.
• Operation is protected by a user defined code, which is simply keyed in
from the telephone keypad.
• a relay is included for one output: 10A / 250VAC
• automatic pick-up can be selected for ± 8 or ± 3 rings
• automatic hang-up if no code is entered within 20 seconds
• supply voltage: 12VAC / 300mA
• dimensions: 105 x 130mm / 4.1 x 5.1”
K8023
This kit allows you to control up to 10 devices using only 2
wires at a long distance.
• Microprocessor controlled.
• Inputs can be push-buttons, switches or open collector
outputs from another device.
• The receiver section provides 10 open collector outputs
that allow you to control relays directly.
• Terminal block connectors for all input and output
connections are included.
• All outputs are provided with LED indication.
• Can be used with our kits : K8000, K8006...
• Can be connected to our standard relay card : K6714 or
K6714-16.
• 10 open collector outputs: 50V / 100mA
• tested to a distance of up to 50m (55 yards) between
control- and receiver section
• operating voltage: single 12-15V AC or DC, 300mA
• dimensions:
• control pcb: 70 x 50 x 16mm / 2.7 x 2 x 0.6”
• receiver pcb: 103 x 50 x 24mm / 4 x 2 x 1”
K8049
compatible with: K6711, K6712,
K6713, K8046, K8050, K4100,
K4500, MK161, MK163, MK164. 4
addresses allow the use of multiple
receivers in one room
power supply: 3 x 1.5V AAA
batteries
• up to 15 channels can be
operated
• rubber keypad
• LED function indication
• compatible with most Velleman
IR receiver kits
K8050
works together with K6710, K8049, K8051, K8055,
K8056, K6714, K6714-16, K2633, .... 15 open
collector contacts: max. 50V/50mA. LED indication
for each output. multiple IR sensors possible (type :
IR38DM). transmitter - receiver range: up to 20m. 4
different modes: . 15 independent outputs. 15 rotary
outputs. 7 independent outputs & 8 rotary outputs. 7
rotary outputs & 8 rotary outputs (independent from
each other). 3 addresses allow the use of multiple
receivers in one room. optional board-to-wire
connectors-female: BTWF5 & BTWF20
power supply: 8 ~ 14VDC or 2x6 ~ 2x12VAC
(150mA)
• current consumption:
• all outputs off: 10mA
• all outputs on: 150mA
• dimensions: 71 x 114mm / 2.8 x 4.5”
mounted version
mounted version
K8051
15-channel ir remote stick
K6501
Remote control by telephone
K8049
15-channel ir transmitter
K8050
15-channel infrared receiver
K8023
10-channel, 2-wire remote control