Datasheet

44
150mm
230mm
114mm
74mm
HPG1
powered
Instruments
PCS10
record DC signals or slow-moving signals over very long periods. the measurements are automatically stored on your
hard disk for further processing. thanks to the USB connection no power supply is necessary and installation is easy and
straightforward. signals are instantly displayed on the PC screen using an analogue or DVM display.
hardware:
• USB connected and powered
• four DC-coupled input channels
• input resistance: 1Mohm
• maximum samples per second: 100
• four input ranges: 3V / 6V / 15V and 30V
• sensitivity: 10mV
• accuracy: ±3% of full scale
• maximum input: 30Vdc
• power and recording/diagnostic LED
• software:
• analogue trace or DVM readout
• 4 channels record simultaneously
• minimum / maximum sample hold function for DVM
• from 1 sec to 1000 sec per division
• storage and recall of screens (full colour) or data
• automatic recording option for long recordings
• on screen markers for time and voltage
• DLL included for your own developments
APS230
2 input channels. high contrast LCD with white
backlight. full auto set-up for volt/div and time/div.
recorder roll mode, up to 170h per screen. trigger
mode: run - normal - once - roll .... adjustable
trigger level and slope. peak measurements: max,
min. and pk to pk. measurements: rms, dB(rel), dBV,
dBm and dBG. Direct Audio power measurements.
x1 and x10 probe calculation option. several display
modes. StereoScope mode for audio measurement.
X and Y position shift. battery pack included, fast
charge possible. in the box: . RS232 cable (9 pole
sub D). 2 Insulated 60MHz X10 measuring probes.
user manual. adaptor (110Vac 60Hz / 230Vac 50Hz).
battery pack. Advance Personal Scope unit
• input impedance: 1 Mohm / 20pF
• bandwidth: 2 x 30MHz
• sampling: 240MS/s per channel
• step markers for voltage, time, ...
• vertical resolution: 8 bit
• sensitivity: min. 30µV
• volts per division: 1mV to 20V/div
• time base: from 25ns to 1 hr/div
• AC/DC input coupling selection
• RS232 communication with PC (PCUSB6 for
USB connection in option)
• dimensions: 230 x 150 x 50mm / 9.1 x 5.9 x 2.0”
APS230
Advanced personal scope 240ms/s
PCS10
4-channel recorder / logger
HPG1
POWER SUPPLY
DAC-RESOLUTION
10BITS
SWEEP
FUNCTION
A complete function generator in pocket format!
Now you can take test signals on the move, 3 waveforms can be
selected.
Set the output voltage or frequency and select signal waveform using the
on the screen menu.
A powerful sweep function is also included.
1MHZ
FUNCTION GENERATOR
• DDS type generator (Direct Digital Synthesis)
• DAC resolution: 10 bits
• frequency range: from 1Hz to 1.000.000Hz (± 0.01%)
• frequency steps: 1Hz, 10Hz, 100Hz, 1kHz and 10kHz
• waveforms: sine, square and triangle
• sweep function with bi-direction option
• output voltage: max. 8Vpp
• real output level measurement: dBm / Vrms or Vpp readout
(±3%)
• typical sine wave distortion (THD): < 0.1% @ 0dB / 600
ohms
• square wave rise/fall time: typ. 0.2µs
• output impedance: 50 ohms
• multi-language menu (Eng / Fre / Dut / Ge / Es )
• white LED backlight
• charging power supply: 9Vdc/200mA
• operates on NiMH rechargeable battery pack (included)
• dimensions: 74 x 114 x 29mm / 2.9 x 4.5 x 1.14”
• in the box:
• handheld Pocket Generator
• getting started manual
• BNC adapter, BNC male to RCA female
• BNC male to 2x 4mm banana plug
• USB power supply adaptor
New
Option
BAGPS
Option
CARSUSB1