Datasheet

44
Hobby
contains: . soldering iron (230Vac): VTSC30N1. solder:
SOLDERDISPLF. soldering iron holder: STANDLC. pair of wire-cutters:
VT057. flashing LEDs: MK102. LED light organ: MK103
K/START
MK178 MK181MK180
Note: only for use inside a cabinet
• blue LED operated on mains
voltage.
• suited for mains indicator or
other pilot lamps.
• for safety guidance, stairs,
corridors…. small in size!.
• special X2 safety capacitor
• supply from: 100Vac to
240Vac 50Hz or 60Hz
• dimensions: 28x18mm / 1.10
x 0.71”
This small circuit is of great value to
check you car battery status. (enclosure
not included!)
• easy to build in.
• only 2 wires to connect (connect
after ignition).
• includes: board to wire connector
• dimensions: 30x20mm / 1.18 x
0.78” (board)
Use the unit with any kind of LEDs: low current, hi-power, LED
strips, clusters, etc.
• two channels.
• 7 flash effects. adjustable speed. detachable LED PCBs.
high-power MOSFET outputs: (3A/channel). memory for
last selected effect. supplied with 20.000mcd white LEDs.
single-button selection. applications: alarm systems, hazard
flasher, attention grabber, disco effect, etc.
• supply voltage: 12VDC
• outputs: 3A/Channel max.
• dimensions:
• main board:
• l x w: 65x33mm / 2.56x1.3”
• height: 20mm / 0.78”
• LED board:
• l x w: 18x33mm / 0.71x1.3”
• height: 12mm / 0.47”
Works on every car with a third brake light, with
either LEDs or incandescent bulbs. Check with local
authorities if the use of this device is allowed in your
country. Easy two-step install. makes your 3rd brake
light flash. selectable number of flashes: 5 or 10 times.
selectable flash repeat interval: always or not within
5-7sec between two brakes. includes shrink tube to
cover complete unit.
• flash frequency: 7 times per second
• power supply: 12VDC
• max load: 4A
• dimensions: +/- 60x30x20mm/2.4x1.2x0.8”
This chevron type arrow features different
animations.
• Rolling, scrolling, inverse scrolling, blinking,
partial blinking etc… Great for indication
purposes or advertisement and attention
grabber.
• 28 bright 3mm RED LED’s
• power supply: 9 to15Vdc or 9V battery (not
included)
• current consumption: 10 to 40mA @ 9V
• dimensions: 64wx130hx16d mm (ex bat) / 2.5
x 5.12 x 0.63”
MK131
Miniature traffic light as used on four-way
junctions.
• Realistic operation with adjustable delay.
• 12 LEDs.
• Great for model railroads, exhibitions, as a toy...
• low power consumption: 15mA
• power supply: 9V battery (not incl.)
• ON/OFF switch
• dimensions: 50 x 35 x 115mm / 2 x 1.4 x 4.5”
MK176
Scare off possible intruders with this low-
cost alarm simulator.
‘Realistic’- looking flash sequence. runs for
months on a single AA battery. complete with
enclosure and fixation strip. wall mounted
or desk-top operation. applications: protect
homes, shops,cars, cabins, trailers, boats,
equipment,…
• power supply: 1.5V AA battery (not incl.)
• power consumption: 20µA idle, 3mA
when flashing
• dimensions: 80x55x33mm / 3.15 x 2.2
x 1.3”
MK126
LED with realistic flash sequence simulates active
car alarm system.
activates automatically when the engine is turned
off. easy installation with two wires. adjustable
sensitivity
low current consumption: 12mA max. (12V only)
• comes complete with prewired LED holder
and two warning labels
• dimensions: 57 x 45mm / 2.3 x 1.8”
MK168
MKSE T1
6 in 1
MKSE T1
contains: . MK101. MK102. MK109. MK113. MK120.
MK127.
• with hanger
MINIKITS
STARTER SET
Ideal for the
beginning
hobbyist
Iedereen
kan
solderen!
K/START
Soldering starter kit • renewed version
MK180
Two-channel hi-power led asher
MK178
3rd brake light asher
MK181
Ac power voltage led
MK189
12v car battery
monitor
MK126
Car alarm simulator
MK168
Alarm sensor simulator
MK1 31
Trafc light
MK176
Led chevron arrow