User guide

2
Using your FOXTEL iQ
Your FOXTEL iQ has been manufactured to meet international safety
standards. To obtain the best results and operate the FOXTEL
iQ safely it
is important that you read the safety instructions below.
If you have any doubts about the installation, operation or safety of your
FOXTEL iQ, please consult FOXTEL
.
WARNING!
Remember that contact with 240 V AC power can be lethal or
can cause a severe electric shock. To avoid this risk:
Never remove the top cover from your FOXTEL iQ as
there are high-voltage live parts inside. There are no user-
serviceable parts inside your FOXTEL iQ.
Make sure that all electrical connections are safe and
secure.
Do not connect any of your equipment (FOXTEL iQ, TV,
video recorder etc.) to the power supply until you have
properly connected all the other leads.
Disconnect your FOXTEL iQ from the power supply (by
disconnecting its power lead from the power point on the
wall) before you disconnect any other equipment from its
rear panel.
Never push anything into the holes, slots or other
openings of the FOXTEL iQ case (except your FOXTEL
Smartcard into its correct slot).
CAUTION!
✔ To ensure a free flow of air around the FOXTEL iQ, allow at least
10cm of space above and around the FOXTEL
iQ.
✘ Never stand your FOXTEL iQ on soft furnishings or carpets. Do
not cover any ventilation slots.
✘ Do not place your FOXTEL iQ in an unventilated cabinet or on top
of a unit which emits heat (e.g. a TV).
✔ If the FOXTEL iQ is placed with other items of audio/video
equipment in a cabinet, make sure
all items have sufficient space all
around them, to allow ventilation and prevent overheating.
✘ Do not stack items of audio/video equipment in a crowded space.
✘ Do not use or store your FOXTEL iQ in hot, cold, damp or dusty
places.
✘ Do not put anything on your FOXTEL iQ which might melt, drip or
spill into it. Never stand objects filled with liquids, such as vases, on
top of your FOXTEL
iQ.
✘ Never place naked flame sources, such as lighted candles, on top of
your FOXTEL
iQ.
✘ Do not pick up or otherwise move your FOXTEL iQ while it is
connected to the mains supply. If you want to move your FOXTEL
iQ, first disconnect it, then wait at least 30 seconds before
continuing.
For your safety