Universal DVR/PVR 5-Device Remote User's Guide

www.urcsupport.com

7. To search for the codes of your other devices,

repeat steps 1 through 5, but substitute the

appropriate key (e.g., AUX, DVD, AUD, or CBL)

for the device you are searching for.

CHECKING THE CODES

If you have set up the Atlas DVR/PVR 5-Device

Universal Remote Control with Learning by searching

for your device code (on the previous page), you may

need to find out which four-digit code is operating your

equipment.

or example, to find out which code is operating your TV

5. To check for other device codes, repeat steps 1

through 4, but substitute the appropriate key

(e.g., AUX, DVD, AUD, or CBL) for the device

you are checking. Write down the codes in the

appropriate boxes on page 10.

USING LEARNING

The Atlas DVR/PVR 5-Device Universal Remote Control

with Learning includes a Learning feature so you can

add functions that are unique to your home

entertainment devices (e.g.,VCR T

racking Up or Down).

However, there are some considerations

6. Press SETUP once to lock in the code. The TV

key will blink twice.

1. On the remote control, press TV once; it will

blink once. Then press and hold SETUP until

the TV key blinks twice.

2. Enter 9 9 0. The TV key will blink twice.

3. To view the code for the first digit, press 1

once. Count the number of times the TV key

blinks (e.g., 3 blinks = 3) and write down the

number in the leftmost TV Code box on

page 10.

NOTE: If a code digit is 0, the selected mode key will

not blink.

4. Repeat step 3 three more times for the

remaining digits. Use 2 for the second digit, 3

for the third digit, and 4 for the fourth digit.

Finish writing down the code in the TV Code

boxes on page 10.