Universal DVR/PVR 5-Device Remote User's Guide

www.urcsupport.com

4. On the original remote, press and hold the key

to be learned. The Atlas DVR/PVR 5-Device

Universal Remote Control with Learning’s

LED will blink rapidly, then turn off. Continue

holding the key on the original remote until

the Atlas DVR/PVR 5-Device Universal

Remote Control with Learning’s LED blinks

twice.

NOTE: If the LED displays one long blink, a learning

error has occurred. Try repeating this step

again until a successful capture occurs. If the

function is still not captured, press and hold

SETUP to exit programming and review the

“Learning Precautions” on the previous page.

If needed, also see “Troubleshooting” on

page 22. After review, start programming

again at step 1.

Deleting a Single Learning Key

his process returns the key to its original programmin

for the mode you select. You can also delete learned

programming by teaching a different function to the key

(see “Programming a Learned Key” on page 13)

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

3. Press the key containing the learned function

to be deleted twice. The remote will blink

twice.

5. Repeat steps 2 through 4 for another mode

and/or key or press and hold SETUP to exit

programming.

1. Press and hold SETUP until the last-selected

mode key blinks twice, then press 9 7 6.

2. Press a mode key once (i.e., AUX, DVD, AUD,

TV, or CBL).

4. Repeat steps 2 through 3 for another key or

press and hold SETUP to exit programming.