Millennium 4 Mnl M4094 rev 12/27/02 MILLENNIUM™ 4 Universal Remote Control User’s Guide 11:00 AM Page 1
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programming TV Control . . . . . . . . . . . . . . . . . . . . . 8 Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . .
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM INTRODUCTION The Universal Electronics Millennium™ 4 is our latest generation universal remote control. It is designed with sophisticated technology that will allow you to finally consolidate the clutter of all of the original remote controls in your home entertainment system.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM FEATURES AND FUNCTIONS Use the illustration below to locate Millennium 4 features and then study the Key Charts (on the next two pages) to learn how they function.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM Key Charts The LED (red light) blinks to show that the remote control is working and is sending signals. Press AUDIO, VCR, TV, or CBL once to select a home entertainment component to control. Press POWER once to turn on or off the selected home entertainment component. Use SETUP for all programming sequences. Use the keypad (0 ~ 9) to directly select channels (e.g., 09 or 31). Press MUTE once to turn sound off or on.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM FEATURES AND FUNCTIONS Key Charts (continued) Use cursor keys to move the cursor in the program guide and menu screens. Use SELECT/OK to choose options, PPV events, and to tune programs from the program guide. Use INFO to display current channel and program information. Press SETTINGS once to display your cable converter’s screen menu. Use PAGE ▲ (or PAGE ▼) to page up or down) through menu screens and the program guide.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM INSTALLING BATTERIES ❶ ❷ ❸ 1. On the back of the Millennium 4, push the tab and lift off the battery cover. 2. Obtain two (2) fully-charged AA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the unit by pressing POWER and any mode key (e.g. AUDIO, VCR, TV, or CBL).
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING TV CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your TV in the Setup Codes for TVs in the next section, and write it in the space below. TV Brand: __________________________________ The brands are listed in alphabetical order with the most popular codes listed first.
Millennium 4 Mnl M4094 rev Belcor Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity Cineral Citizen Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Electroband Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter GoldStar Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Harvard Hitachi Infinity Inteq JBL JCB JVC KEC KTV Kenwood Konka LG 12/27/02 11:00 AM 0019 0154, 0016 0180 0019 0236, 0463 0180 0030, 0056 0030 0054 0000 0451,
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING TV CONTROL Setup Codes for TVs (continued): LXI Logik Luxman MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RCA RadioShack Realistic Runco SSS Sampo Samsung Sansei Sansui Sanyo Scimitsu 0047, 0747, 0054, 0154, 0156, 0178 0016 0056 0150, 0030, 0178, 0019 0
Millennium 4 Mnl M4094 rev Scotch Scott Sears Semivox Semp Sharp Shogun Signature Sony Soundesign Squareview Starlite Supreme Sylvania Symphonic TMK TNCi Tandy Technics Technol Ace Techwood Teknika Telefunken Toshiba Vector Research Victor Vidikron Vidtech Wards White Westinghouse Yamaha Zenith 12/27/02 11:00 AM 0178 0236, 0180, 0178, 0179, 0019 0047, 0747, 0054, 0154, 0156, 0178, 0179, 0056, 0171 0180 0156 0093, 0688, 0165 0019 0016 0000 0180, 0178, 0179 0171 0180 0000 0054, 0030 0180, 0171 0178, 0056
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING VCR/DVD PLAYER CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your VCR in Setup Codes for VCRs on the next page, or your DVD player in Setup Codes for DVD Players on page 15, and write it in the appropriate space below.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM Setup Codes for VCRs: Admiral Adventura Aiko Aiwa Akai America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Carver Cineral Citizen Colt Craig Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson 0048, 0209 0000 0278 0037, 0000 0041 0278 0035 0240 0037 0240 0104 0184, 0121, 0209, 0002, 0479, 0295 0072, 0278 0037 0035 0081 0278 0037, 0278 0072 0037, 0047, 0240, 0072 0035, 0060, 0162, 0041 0
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING VCR/DVD PLAYER CONTROL Setup Codes for VCRs (continued): Kenwood Kodak LXI Lloyd’s Logik MEI MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Noblex Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar Quarter Quartz Quasar RCA RadioShack Radix Randex Realistic 0067, 0041 0035, 0037 0037 0000 0072 003
Millennium 4 Mnl M4094 rev ReplayTV Runco STS Samsung Samtron Sanky Sansui Sanyo Scott Sears Semp Sharp Shintom Shogun Singer Sony Sylvania Symphonic TMK Tatung Teac Technics Teknika Thomas Tivo Toshiba Totevision Unitech Vector Video Concepts Videosonic Wards White Westinghouse XR-1000 Zenith 12/27/02 11:00 AM 0614, 0616 0039 0042 0045, 0240 0643 0048, 0039 0000, 0067, 0209, 0041, 0479 0047, 0240, 0104, 0046 0184, 0045, 0121, 0043 0035, 0037, 0047, 0000, 0042, 0104, 0046, 0105 0045 0048 0072 0240 0072
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING VCR/DVD PLAYER CONTROL Setup Codes for DVD Players (continued): Konka Magnavox Marantz Mitsubishi Onkyo Optimus Oritron Panasonic Philips Pioneer Proscan RCA Samsung Sharp Sherwood Sony Technics Techwood Theta Digital Toshiba Yamaha Zenith 0711, 0719, 0720, 0721 0503, 0675 0539 0521 0503, 0627 0571 0651 0490, 0677, 0632, 0678, 0679 0503, 0539 0525, 0571, 0632 0522 0522, 0571 0573 0630 0633 0533 0490 0692 0571 0503 0490, 0545 0503, 0591 PROGRAMMIN
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM NOTE: If the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again. 4. Aim the Millennium 4 at your TV/VCR Combo and press POWER once. The unit should turn off. If it does not respond, repeat steps 2-3, trying each code listed for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 24). 5.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING TV/VCR COMBO CONTROL Setup Codes for TV/VCR Combos (continued): Magnin Memorex Mitsubishi Orion Panasonic Penney Quasar RCA Sansui Sanyo Sears Sharp Sony Symphonic Zenith 0240 0037, 0162 (for TV use 0250) 0048 (for TV use 0093) 0002, 0294, 0479 0035 (for TV use 0051), 0162 (for TV use 0250) 0035 (for TV use 0051), 0240, 0162 (for TV use 0250) 0035 (for TV use 0051), 0162 (for TV use 0250) 0060 (for TV use 0047), 0035 (for TV use 0051), 0048 (for T
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM To Program the CBL Key: 1. On the next page, locate the brand name of your Cable Converter in Setup Codes For Cable Converters, or DBS (Direct Broadcast Satellite) Receiver in Setup Codes For DBS Receivers, and write it in the appropriate space below. Cable Converter Brand: ________________ or DBS Receiver Brand: __________________ The brands are listed in alphabetical order with the most popular codes listed first.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL (continued) To Lock the CBL Key: 1. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 7. The LED will blink twice. 3. Press CH+ once. The LED will blink twice.
Millennium 4 Mnl M4094 rev Next Level Philips Proscan RCA RadioShack Samsung Sony Star Choice Toshiba 12/27/02 11:00 AM 0869, 0892 0749, 1076 0392 0566, 0392 0869 1109 0639 0869 0749 PROGRAMMING CHANNEL CONTROL LOCK By activating this feature, the Millennium 4 will only allow access to the channel control capabilities of your cable converter. This will guarantee that you do not inadvertently change the channel on your TV or VCR. To Activate Channel Control Lock: 1.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING AUDIO CONTROL Locate the brand name of your audio amplifier or receiver in the one of accompanying code lists at the end of this section.Write it in the appropriate space below. Audio Amplifier Brand: ________________________ or Audio Receiver Brand:__________________________ The brands are listed in alphabetical order with popular codes listed first.You will use one of these codes to program the Millennium 4 to operate your audio device: 1.
Millennium 4 Mnl M4094 rev Optimus Panasonic Philips Polk Audio Realistic Sony Soundesign Technics Victor Wards Yamaha 12/27/02 11:00 AM 0395 0308 0892 0892 0395 0689 0078 0308 0331 0078 0354 Setup Codes for Audio Receivers: ADC Adcom Aiwa Capetronic Carver Casio Clarinette Denon Garrard Harman/Kardon JBL JVC Kenwood Lloyd’s MCS Magnavox Marantz Modulaire Nakamichi Onkyo Optimus Panasonic Penney Philips Pioneer Proscan Quasar RCA Realistic Sansui Sharp Sony Soundesign Sunfire Teac Technics 0531 0616 1
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING AUDIO CONTROL Setup Codes for Audio Amplifiers (continued): Victor Wards Yamaha Yorx Zenith 0074 0014, 0054 0176, 1176, 0186 0195 0857 SEARCHING FOR YOUR CODE If your TV,VCR or DVD Player, Cable Converter, or Audio Component does not respond to the Millennium 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM CHECKING THE CODES If you have set up the Millennium 4 using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 0. The LED will blink twice. 4. To view the code for the first digit, press 1 once.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM PROGRAMMING THE POWER KEY FOR ALL ON/OFF (CABLE MODE ONLY) With the Millennium 4, you can program the POWER key to turn all of your equipment on and off with the press of one button in the Cable mode. In other modes, individual power control is retained, so you can still power on or off your TV,VCR or DVD player, or audio component independently. 1. On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP. 2.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM RE-ASSIGNING DEVICE KEYS The Millennium 4 can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Millennium 4 control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUDIO key to operate the second VCR as follows: 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 2. The LED will blink twice. 3.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM CHANGING VOLUME LOCK The Millennium 4 is set to control volume of a component through your TV while in the TV,VCR, or Cable mode. However, in the Audio mode, you have separate control of of your audio component’s volume. If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a non-associated mode (e.g.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM To Change Volume Lock to the Audio Mode: NOTE: Performing these steps will allow you to access the volume control of your audio component in all modes. 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press AUDIO once. The LED will blink twice. 3. Now, whenever you press press VOL+, VOL-, or MUTE on the Millennium 4, volume will be controlled by your audio component.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: LED blinks when you press a key, but home entertainment component does not respond. SOLUTION: Make sure you are aiming the Millennium 4 at your home entertainment component and that you are within 15 feet of the component you are trying to control.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM ADDITIONAL INFORMATION The Millennium 4 does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your Millennium 4. For help via the Internet, visit us at: cable.rcinfo.com (do not type in http:// or www before the address) For help via e-mail, contact us at: CableHelp@ueic.com Copyright 2002 by Universal Electronics Inc.
Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM Page 32
