Universal Remote Control User's Guide Millennium 4

ManualsBrandsUniversal Electronics ManualsUniversal RemoteMillennium 4

MILLENNIUM™ 4 Universal Remote Control User’s Guide

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features and Functions . . . . . . . . . . . . . . . . . . . . . . 3

Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Programming TV Control . . . . . . . . . . . . . . . . . . . . . 4

Setup Codes for TVs . . . . . . . . . . . . . . . .. . . . . . 5

Programming VCR/DVD Player Control. . . . . . . . . . 6

Setup Codes for VCRs . . . . . . . . . . . . . . . . . . . . . 7

Setup Codes for DVD Players . . . . . . . . . . . . . . . . 7

Programming TV/VCR Combo Control. . . . . . . . . . . 8

Setup Codes for TV/VCRs . . . . . . . . . . .. . . . . . . .8

Programming Cable Converter

(or DBS Receiver) Control . . . . . . . . . . . . . . . . . . . . 9

To Unlock the CBL Key. . . . . . . . . . . . . . . . . . . . .9

To Program the CBL Key . . . . . . . . . . . . . . . . . . . 9

To Lock the CBL Key. . . . . . . . . . . . . . . . . . . . . . 9

Setup Codes for Cable Converters. . . . . . . . . . . . 10

Setup Codes for DBS Receivers . . . . . . . . . . . . . 10

Programming Channel Control Lock. . . . . . . . . . . . 10

To Activate Channel Control Lock . . . . . . . . . . . . 10

To De-Activate Channel Control Lock. . . . . . . . . . 10

Programming Audio Control. . . . . . . . . . . . . . . . . . 11

Setup Codes for Audio Amplifiers . . . . . . . . . . . . .11

Setup Codes for Audio Receivers . . . . . . . . . . . . .11

Searching For Your Code. . . . . . . . . . . . . . . . . . . . 12

Checking The Codes . . . . . . . . . . . . . . . . . . . . . . . 12

Programming The “Tune-In” Keys

. . . . . . . . . . . . .13

To Program a “Tune-In” Key. . . . . . . . . . . . . . . . 13

To Clear a “Tune-In” Key . . . . . . . . . . . . . . . . . . 13

Re-Assigning Device Keys . . . . . . . . . . . . . . . . . . . 14

Changing Volume Lock . . . . . . . . . . . . . . . . . . . . . 14

To Change Volume Lock to the Cable Mode . . . . . 14

To Change Volume Lock to the TV Mode. . . . . . . .14

To Change Volume Lock to the VCR Mode . . . . . . 14

To Change Volume Lock to the Audio Mode. . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Additional Information. . . . . . . . . . . . . . . . . . . . . . .

Page 1 of 15

Summary of content (15 pages)

PAGE 1
MILLENNIUM™ 4 Universal Remote Control User’s Guide TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features and Functions . . . . . . . . . . . . . . . . . . . . . . 3 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Programming TV Control . . . . . . . . . . . . . . . . . . . . . 4 Setup Codes for TVs . . . . . . . . . . . . . . . .. . . . . .
PAGE 2
INTRODUCTION The Universal Electronics Millennium™ 4 is our latest generation universal remote control. It is designed with sophisticated technology that will allow you to finally consolidate the clutter of all of the original remote controls in your home entertainment system.
PAGE 3
FEATURES AND FUNCTIONS Key Charts Use the illustration below to locate Millennium 4 features and then study the Key Charts to learn how they function.
PAGE 4
INSTALLING BATTERIES 1. On the back of the Millennium 4, push the tab and lift off the battery cover. 2. Obtain two (2) fully-charged AA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries. 3. Press the battery cover back into place. The tab should click when the cover is locked. 4. Test the unit by pressing POWER and any mode key (e.g. AUDIO,VCR, TV, or CBL). If the batteries are inserted correctly, the LED will blink once.
PAGE 5
SETUP CODES FOR TVs: AOC 0030, 0019 Admiral 0093, 0463 Aiko 0092 Akai 0030 Alaron 0179 America Action 0180 Anam 0180 Audiovox 0451, 0180, 0623, 0092 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0030, 0056, 0092, 0280 Concerto 0056 Contec 0180 Craig 0180 Crosley 0054 Crown 0180 Curtis Mathes 0047, 0747, 0054, 0154, 0051, 0451, 0093, 0060, 0030, 0056, 01
PAGE 6
PROGRAMMING VCR/DVD PLAYER CONTROL NOTE: If you own a TV/VCR combination, skip this section and perform “Programming TV/VCR Combo Control” on page 8. Locate the brand name of your VCR in Setup Codes for VCRs on the next page, your DVD player in Setup Codes for DVD Players on the next page, and write it in the appropriate space below.
PAGE 7
SETUP CODES FOR VCRs: Admiral 0048, 0209 Adventura 0000 Aiko 0278 Aiwa 0037, 0000 Akai 0041 America Action 0278 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121, 0209, 0002, 0479, 0295 CCE 0072, 0278 Calix 0037 Canon 0035 Carver 0081 Cineral 0278 Citizen 0037, 0278 Colt 0072 Craig 0037, 0047, 0240, 0072 Curtis Mathes 0035, 0060, 0162, 0041 Cybernex 0240 Daewoo 0045, 0278, 0561 Denon 0042 Dynatech 0000 Electrohome 0037 Electrophonic 0037 Emerex 0032 Emerson 003
PAGE 8
PROGRAMMING TV/VCR COMBO CONTROL Locate the brand name of your TV/VCR Combo in Setup Codes for TV/VCR Combos below, and write it in the space below. TV/VCR Combo Brand: ________________________ The brands are listed in alphabetical order with popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your TV/VCR Combo: 1. Turn on your TV/VCR Combo and insert a video cassette. 2. On the Millennium 4, press VCR once.
PAGE 9
PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL The Millennium 4 is preprogrammed at the factory to operate the cable converter given to you by your cable company. However, if you have another brand or model of cable converter or satellite receiver that you would like to control, then you’ll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again. To Unlock the CBL Key: 1. Turn on the Cable Converter or DBS Receiver. 2.
PAGE 10
SETUP CODES FOR CABLE CONVERTERS ABC 0003, 0008 Americast 0899 Bell South 0899 General Instrument 0476 GoldStar 0144 Hamlin 0273 Jerrold 0003, 0476 Memorex 0000 Panasonic 0000 Paragon 0000 Philips 0305 Pioneer 0144, 0877, 0533 Pioneer 0533 Pulsar 0000 Quasar 0000 Regal 0273 Runco 0000 Samsung 0144 Scientific Atlanta 0008, 0477, 0877 Starcom 0003 Toshiba 0000 Zenith 0525, 0000, 0899 SETUP CODES FOR DBS RECEIVERS Echostar 0775, 1005 Expressvu 0775 GE 0566 General Instrument 0869, 0892 HTS 0775 Hughes Network
PAGE 11
PROGRAMMING AUDIO CONTROL Locate the brand name of your audio amplifier or receiver in the one of accompanying code lists at the end of this section. Write it in the appropriate space below. Audio Amplifier Brand: ________________________ or Audio Receiver Brand:__________________________ The brands are listed in alphabetical order with popular codes listed first. You will use one of these codes to program the Millennium 4 to operate your audio device: 1. Turn on the audio device. 2.
PAGE 12
SEARCHING FOR YOUR CODE If your TV, VCR or DVD Player, Cable Converter, or Audio Component does not respond to the Millennium 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1. Turn on your TV. 2. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 1.The LED will blink twice. 4.
PAGE 13
PROGRAMMING THE “TUNE-IN” KEYS FOR SPECIFIC CHANNELS The Millennium 4 includes three “Tune-In” keys (located directly below the PAGE keys). Each can be programmed to remember three of your favorite channel settings for a total of nine channels. If you want to change the channels in a previously-programmed “Tune-In” key, you’ll need to clear the key first (see below). To Program a “Tune-In” Key: 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 5.
PAGE 14
RE-ASSIGNING DEVICE KEYS The Millennium 4 can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Millennium 4 control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUDIO key to operate the second VCR as follows: 1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 2. The LED will blink twice. 3. Press VCR once, then press AUDIO once. 4.
PAGE 15
TROUBLESHOOTING -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 4).