Set up your remote. 21.1 & 21.
Take Control With Your Voice Get Started Program Your Remote To Your TV PULL 1 Remove the PULL tab on the back of your remote. 2 Choose your next step. TV1 is located in the same room as your DISH receiver. If this remote control is to be used with TV1, go to Set Up Your Remote for TV1 on the next page of this guide. If this remote control will be used in a room that is different from the one with the DISH receiver (TV2), go to Pair Your Remote to Your Receiver in this guide.
thetoInternet Connect theforInternet SetConnect UpReceiver YourtoRemote TV1 2 Pull out the key on the front of the remote using your thumbnail. Turn it over, and reinsert it so the number 1 is showing. 2 1 IR While pushing the circular indentation, slide the cover downward. 3 Using the tip of a pen, move the signal switch on the back of the remote from UHF to IR. UHF 1 Remove the battery cover on the back of your remote control. This switch is located to the left of the batteries.
Pair Your Remote to Your Receiver 1 Press SYSTEM INFO on your receiver. 3 Press RECORD on your remote. The appearance and location of the SYSTEM INFO button varies between receiver models. This button may be located behind a door on the front of some receivers. 2 Press the SAT button on your remote. 4 Using the TV1 remote, select DONE on screen.
Explore Your Remote Program Your Remote to Your TV 1 Press and hold the device button you want to program until all four device buttons light up. 3 Press the # button. Press and hold TV to pair with your TV. Press and hold DVD or AUX to pair with any other device. 2 Enter the three-digit device code (located on the next page) while the device buttons are lit.
20.0 21.0 21.
21.2 Device Codes Blu-ray/DVD Players (cont.
Regulatory Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: Changes or modifications to this device may void your authority to operate this equipment. 1. This device may not cause harmful interference, Safety Instructions and You must keep safety in mind while using this device. Keep these and any other instructions for future reference. 2.
