BV KITA Android Platform 2019 Quick Reference Guide Part number: R324854A98-00001
ACTIVATING RF Pairing State The KITA RCU shall support both IR and BLE command codes for each key. The default operating mode when supplied and batteries are fitted is explained in the following section. Programming Name Trigger ‘Key 9 (OK)’ and ‘Key 12 (Home)’ keys pressed simultaneously and PAIRING_COMBO held down for 2s ‘Key 13 (CH +)’ and ‘Key 17 (VOL -)’ and keys pressed simultaneously UNPAIR_COMBO and held down for 3s Table 8.14.
stop advertising. The RCU shall repeat the advertising and timeout sequence for ‘N’ loops before entering the IR fallback state and behaving like an IR RCU. (The “N” loop shall be defined as a custom RTC parameters that can be configurable for a platform and future projects). Once in IR fallback the end-user is required to activate pairing using a combo. Note that ads are sent from the RCU periodically when the RCU is disconnected. This is to facilitate reconnection to the STB with no user intervention.
Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Head all warnings 4. Follow all instructions COMPLIANCE WITH FCC RULES AND REGULATIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
COMPLIANCE WITH FRENCH CANADIAN RULES AND REGULATIONS: This device contains license-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference 2. This device must accept any interference, including interference that may cause undesired operation of the device.
