Liberty Global B.V.
ACTIVATING RF The flowchart below shows different setup methods that will be supported by the RCU implementation on the STB: Figure 1 – Quickset flowchart The following are descriptions of the Quickset features: Key Codes Download‐ This feature will download a set of IR codes to the remote. Code Test – this feature allows the user to test and see whether a selected code‐set will work with a specific device prior to assigning it to a mode on the remote.
Optimized Setup Maps – “Optimized setup maps” assists the user with a UI flow, to setup his TV and AMP without searching for the model. After user selects brand, Quickset starts to test RCU keys, and by the user feedback finds the right device and programs it to the RCU. Note: Test keys for OSM are limited to Volume+, Volume- and Mute. One Touch View (OTV) – OTV feature will be executed by pressing STB Power key or TV power Key depending on the state of STB.
Customer Marking Label
Caution Please read all safety instructions to ensure personal safety and prevent damage to equipment.
COMPLIANCE WITH FCC RULES AND REGULATIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications.