OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.fm Page 2 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . .3 Installing Batteries . . . . . . . . . . . . . . . . . . .4 How Kameleon™ Works . . . . . . . . . . . . . . .5 Features And Functions. . . . . . . . . . . . . . . .6 Key Charts. . . . . . . . . . . . . . . . . . . . . . . .7 Device Table . . . . . . . . . . . . . . . . . . . . .12 Adjusting The Display. . . . . . . . . . . . . . . . .
OFA Kameleon wRF UG rev 3.fm Page 3 Monday, August 16, 2004 8:19 PM USER’S GUIDE INTRODUCTION The OFA Kameleon™ 8-Device Remote with RF (URC-9964B00) is a revolutionary universal remote control that uses Universal Electronics’ Kameleon Technology. Moreover, it allows you to consolidate the clutter of all of your original remote controls into one easy-to-use product.
OFA Kameleon wRF UG rev 3.fm Page 4 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF INSTALLING BATTERIES ❶ ❷ NOTE: The two bottom segments of the IR indicator flash when the batteries are running low. The batteries need replacement if one of the following conditions occurs: 1. Pressing any key turns on all keys and icons. 2. The vibration switch no longer activates the display (if the vibration switch feature is still enabled). 3.
OFA Kameleon wRF UG rev 3.fm Page 5 Monday, August 16, 2004 8:19 PM USER’S GUIDE HOW KAMELEON™ WORKS Kameleon™ allows wireless controllers to dynamically change their appearance and functionality, to match the home entertainment environment.Moreover, this technology provides unparalleled ease-of-use and superior control by delivering a uniquely intuitive, graphical interface that intelligently illuminates only the active keys.
OFA Kameleon wRF UG rev 3.fm Page 6 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF FEATURES AND FUNCTIONS Use the illustration to the right to locate features on the OFA Kameleon 8-Device Remote with RF (URC-9960) and then refer to the Key Charts (starting on page 7) to learn how they function. NOTE: The illustration shows all remote control keys. In actual operation, only active keys used by the selected device are displayed and non-active keys are hidden.
OFA Kameleon wRF UG rev 3.fm Page 7 Monday, August 16, 2004 8:19 PM USER’S GUIDE KEY CHARTS. When a key is pressed, the IR Segments animate. Outgoing animation (see arrows) indicates the remote control is sending IR signals to a selected device. Incoming animation (see arrows) indicates the remote control is receiving IR signals from a device being learned (see Using Learning on page 33) Press a Device Key once to select a home entertainment device to control (e.g., DVD).
OFA Kameleon wRF UG rev 3.fm Page 8 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF In the AUX and CBL/SAT modes, use PVR/VOD to access PVR/VOD programs (if available on your cable or satellite service). In the AUDIO mode, use PRESET to access preset stations on your audio device. In the TV mode, use FORMAT to change the aspect ratio or zoom (if feature is available on your TV). In the DVD or PVR mode, press REPLAY once to replay a DVD chapter or a recorded program on your PVR (or DVR).
OFA Kameleon wRF UG rev 3.fm Page 9 Monday, August 16, 2004 8:19 PM USER’S GUIDE In the AUX, CBL/SAT, CD, DVD, and PVR modes, use the Cursor Keys to move the cursor in the program guide and menu screens. Use OK to choose options from your selected device’s menu or guide. In the TV or VCR mode, press SCROLL once to access the Cursor and OK Keys. In the AUDIO mode, press SCROLL twice to access the Cursor and OK Keys.
OFA Kameleon wRF UG rev 3.fm Page 10 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF For CD or AUDIO modes, press SKIP once to skip to the next track on your audio device. After programming, press Macro Key 1 – 4 once to run a macro (see Using Macros on page 30). In the CD, DVD, AUDIO, and VCR modes, use the Transport Keys to control the device’s transport. or In the PVR mode, use the LIVE Transport Keys to control PVR/DVR video.
OFA Kameleon wRF UG rev 3.fm Page 11 Monday, August 16, 2004 8:19 PM USER’S GUIDE In the program mode, use the Program Keys to personalize the remote control as follows: Use DEV SET to program your device codes.See Programming Device Control on page 15. Use SEARCH as an alternate way to set up a device by searching available codes. See Searching For Your Code on page 19. Use THEATER to create a custom mode with favorite remote control keys from different devices in your home theater system.
OFA Kameleon wRF UG rev 3.fm Page 12 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF DEVICE TABLE NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 15. After programming, the OFA Kameleon 8-Device Remote with RF will be able to control the following types of devices: DEVICE KEY CONTROLS THESE DEVICES Video Accessory or second device (e.g., Cable Box, Satellite Receiver, DVD Player, etc.
OFA Kameleon wRF UG rev 3.fm Page 13 Monday, August 16, 2004 8:19 PM USER’S GUIDE ADJUSTING THE DISPLAY Your new remote has several ways to adjust the display for your comfort and best use. ADJUSTING BRIGHTNESS The OFA Kameleon 8-Device Remote with RF has five levels of brightness adjustment and is set to the middle one at the factory. To increase or decrease the brightness, perform the following steps: NOTE: Increasing the brightness of the display can decrease battery life. 1.
OFA Kameleon wRF UG rev 3.fm Page 14 Monday, August 16, 2004 8:19 PM KAMELEON 8-DEVICE REMOTE WITH RF ADJUSTING HOW LONG THE SCREEN LIGHT IS ON The OFA Kameleon 8-Device Remote with RF allows you to control how long the screen light remains on after the last button is pressed. The display-on time is set at the factory to run for about 8 seconds. To increase or decrease that time, perform the following steps: NOTE: Increasing the display on time can decrease battery life. 1.
OFA Kameleon wRF UG rev 3.fm Page 15 Monday, August 16, 2004 8:19 PM USER’S GUIDE SETTING THE VIBRATION SWITCH The OFA Kameleon 8-Device Remote with RF is set at the factory to turn the display on when you pick it up, before you even press a button (the vibration switch is on). To turn vibration off, perform the following steps. 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear. NOTE: Turning off the vibration switch can significantly extend battery life.
