Instructions / Assembly

Regular Arm Installation shown
Attach mounting plate to the door or jamb by either using the fasteners
from the closer being replaced or the fasteners supplied with the
UH4061/UH4062 door closer. For the supplied fasteners, use the
“Preparation for Fasteners” chart on Page 2 of the closer instructions
to identify the fasteners to be used.
Install UH4061/UH4062 door closer on the mounting plate with four
1/4"-20 x 7/16" oval head machine screws and install arm onto closer.
Refer to "Main Arm Installation" (Pages 3-5; dependent on installation
type) for correct arm preload.
Notes:
• When installing forearm shoe or parallel arm bracket reuse existing
holes if possible.
• If existing forearm shoe holes or existing parallel arm holes cannot
be used, redrill new holes in door or frame; following "Door Closer
Installation Instructions"(Pages 3-5; dependent on installation type).
To adjust closer refer to "Door Closer Installation Instructions" provided
(Page 6).
2
3
4
50 Icon, Foothill Ranch, CA 92610-3000 USA
www.hamptonproducts.com • 1-800-562-5625
©2019 Hampton Products International Corp.
999-30014 REVA_Eng 08/19
FOR CUSTOMER CARE CALL TOLL FREE
800-562-5625 OR [e-mail]
UNIVERSAL MOUNTING PLATE
UH4061/UH4062 INSTALLATION INSTRUCTIONS
999-30014