Specifications

INSTALLATION
Section 2-4
1. Power on your computer and boot into
Windows. If your computer is already
running, save your work and close all
programs except Windows.
2. Connect the power cord from your power
source to the power cord inlet (6) of the
VersaLASER.
3. If you have an external exhaust system,
connect your external exhaust hose to the
exhaust port (5) and secure with a hose
clamp.
4. Connect a provided USB cable from USB
port (1) of the VersaLASER to an available
USB port in your computer.
1. First USB port (to computer)
2. Second USB port (to optional
accessory)
3. Third USB port (to optional accessory)
4. USB connectivity and status LED’s.
5. Exhaust port
6. Power cord inlet
7. Air hose connection
NOTE: If you purchased either the Computer Controlled Air Cleaner (CCAC) or the Computer
Controlled Compressed Air Unit (CCAU), DO NOT connect their respective USB cables to the
VersaLASER at this time. We will address those options later in this section.
• After you have connected the USB cable and within about 15 sections the “Found New Hardware
Wizard” dialog box will appear.
• Windows asks if you would like to install the software automatically or you choose to install from a
specified location (Advanced). Select the advanced method and click “Next”. Select the “Search
Removable Media” choice and proceed to the next step.
The VersaLASER Software Installation CD-ROM
The VersaLASER Software Installation CD-ROM can be found in a pocket on the inside of the back cover
of this manual.
• Insert the CD-ROM into your CD-ROM drive now and click “Next”.
• The software will begin loading and the Windows Logo Testing warning will appear. Ignore this
statement by Microsoft and simply click “Continue Anyway”.
• The VersaLASER software will continue to load and at some point may ask you for your VersaLASER
model type. Choose the appropriate model. If you choose a model that does not match what you
have purchased, you will have problems running the VersaLASER. If you are unsure what model you
have, refer to the serial tag located on the back of your VersaLASER.
• Click “Finish” to complete the installation and RE-BOOT your computer.
• If you purchased the Computer Controlled Air Cleaner (CCAC) accessory and/or the Computer
Controlled Compressed Air Unit (CCAU), at this time, proceed to Section 5 of this manual and
follow the installation instructions for that device. When you have completed the installation,
return to this section to continue configuring the software.