Specifications

ACCESSORIES
Section 5-6
Integrated Cart
Features:
• Size: 25”W x 22” D x 30”H / Weight: 95 lbs
• Maximum stability at low cost / Powder-coated, durable
construction
• Four “foot” ports to secure the VersaLASER to the cart to
prevent slipping (1)
• Two large storage drawers (2 & 3)
• Locking casters for moving convenience (4)
Installation
• Push down on the tabs of the locking casters so that the cart does not roll.
• Obtain the assistance of another person. One person should grasp the front of the machine and
place his hands where the arrows indicate. The other person should stand in the back of the machine
and place his hands where the arrows indicate.
• Pick up the VersaLASER, place it on top of the cart and locate the VersaLASER’s four feet into the
four, foot ports.
• If this is the first time you will be making connections to the VersaLASER, proceed back to Section 2
to complete the installation process.
Computer Controlled Air Cleaner / Cart (CCAC)
Features
• Size: 25”W x 22” D x 30”H / Weight: 200 lbs
• Eliminates smoke, dust and fumes from the engraving process.
• Controlled through a USB port connected to the VersaLASER and is activated only when jobs are
in process
• Filters are concealed within the two drawers
• Foot ports to secure the VersaLASER to the cart to prevent slipping
• Powder-coated, durable construction
• Locking casters for moving convenience