Specifications

PRINTER DRIVER CONTROLS
Section 2-5
Encapsulated Postscript (EPS) Images
Bitmap images cannot be cut by the laser system only engraved. The only way to have the laser system
cut out or vector a bitmap is to first convert it to a vector file format such as an EPS. Raster to vector
conversion programs are available that trace the bitmap (this only works well with monochrome bitmaps)
and creates a separate EPS vector file. These EPS files can then be imported into the graphics program
and printed out from there. Since tracing programs have many adjustments, some practice with them is
necessary to produce desirable results.
The laser system does not support Encapsulated PostScript (EPS) printing directly. EPS files can only be
edited and printed if they are first imported into a graphics program. However, since EPS files support
engraving and cutting objects, they are therefore useful for transferring artwork from one graphics
program to another. Once an EPS file has been imported into a graphics program, the objects can be
outlined, stretched, rotated, mirrored, filled with different colors, or anything else desired just as long as
your graphics software can edit EPS images. Be careful when using EPS files in layout software as
opposed to true graphics software. Layout software may allow the placement of EPS files in the artwork
but may not actually import and convert the EPS file to a useful format for the printer driver and therefore
may not print correctly. Please refer to your graphics software’s documentation on whether or not it can
edit and print EPS images to a non-Postscript printer.
Postscript (PS) Images
The laser system is NOT a postscript device. This means that postscript fills, postscript textures, and
especially POSTSCRIPT FONTS WILL NOT be able to print to the laser system. Sometimes using
Adobe Type Manager (ATM) will allow some postscript fonts to print correctly but most of the time does
not work properly.
Helpful Tip
If you are having any problems printing a font and you cannot figure out what is going on, select the font
and “convert to curves” or “convert to paths” in your graphics software. This will convert the font into a
bitmapped image and will print correctly to the laser system. Refer to your graphics software on how to
convert fonts. However, postscript textures and postscript fills cannot be converted and will not print to
the laser system.
Specific Software Setup Instructions
Some graphics software programs require a special setup procedure in order for the software to function
correctly with the ULS printer driver. In the following pages you will find setup instructions for the most
popular software programs that our customers use. If you are having trouble with other software
programs not included in this document, you may want to switch to one of them. As a reminder, ULS
provides no warranties whatsoever on any software used in connection with a ULS Laser Engraving
System, express or implied. Neither does it guarantee software compatibility with any off-the-shelf
software package or any software program that has not been written by ULS.