Owner’s Manual RM-1 RF Remote
RM-1 Owner’s Manual © 2013 Universal Remote Control, Inc. The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this Owner’s Manual may be subject to change without prior notice.
TABLE OF CONTENTS Congratulations! 1 Displaying the Settings Screen 2 Color Screen 2 Button Light 3 System 4 Button Beep 4 Date/Time 5 Erasing and Resetting 5 Join to Network 6 Specifications 6 Limited Warranty Statement 7 End User Agreement 10 Federal Communication Commission Interference Statement 11 Declaration of Conformity 12
RM-1 OWNER’S MANUAL Congratulations! You’ve purchased a unique synthesis of hardware and software engineering, the ccGEN2 RM-1 remote control. The RM-1 achieves a magnificent combination of power and flexibility by simplifying and automating the operation of even the most complex systems. The CP-1 Central Processor and the AZ-1 RF Antenna are required to make the RM-1 work. The combination of the RM-1, AZ-1 and CP-1 create a robust and powerful system.
RM-1 OWNER’S MANUAL Displaying the Settings Screen You can adjust settings of the RM-1 whenever you like by pressing and holding the MAIN + ENT button for three seconds. When you do the screen will change to the Settings Menu. If you do not press any button on the Settings screen, the RM-1 will beep signifying a time-out after 30 seconds and return to the previous setting or main screen. There are two pages of Settings screens. To access the other page, press either of the page buttons.
RM-1 OWNER’S MANUAL a minimum time of 5 seconds. Pressing the More side will increase the time in steps up to a maximum of 60 seconds. Once the setting is adjusted, press the Save button. Pressing the Cancel button will revert the remote’s Automatic Turn Off setting to the last saved setting. Note: The longer the OLED screen stays on, the faster the batteries will deplete. Button Light The Button Light settings page provides two configurable options for how the RM-1’s hard buttons should behave. 1.
RM-1 OWNER’S MANUAL System The System Settings page provides two options. 1. Power Remaining: This option shows you how much battery life is remaining. You can adjust when the low battery warning screen will appear by pressing the screen buttons to the left and right of the slider bar. The battery indicator will blink when the batteries are low and need to be replaced. Once the setting is adjusted, press the Save button.
RM-1 OWNER’S MANUAL Date/Time The Date and Time are automatically sent from the CP-1 to the RM-1. If you would like to adjust the date or time you can do so on the remote control. Note: Any Date or Time adjustment made on the RM-1 will automatically go out to all the other remotes and keypads in the system. 1. Change Date: Tap the button beside Day, Month, or Year, then use the numeric keypad to enter in the new date information. When you are finished, press the Save button. 2.
RM-1 OWNER’S MANUAL Join to Network This feature is only used by the installer at the remote's initial setup. You will only need to access this screen if directed by your installer or technical support. Press the MAIN button to exit the Join to Network screen. If you do not press a button, it will timeout after 5 minutes. Specifications Microprocessor: ARM7TDMI RAM: 8Mbit SRAM FLASH: 32Mbit Nor FLASH Display: 1.
RM-1 OWNER’S MANUAL Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
RM-1 OWNER’S MANUAL STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS.
RM-1 OWNER’S MANUAL equipment. This limited warranty does not cover the URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as batteries). This limited warranty is invalid if the factory applied serial number has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers.
RM-1 OWNER’S MANUAL END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION. End User Agreement The terms and conditions of the End User Agreement available at www.universalremote.com/eua.php shall apply.
RM-1 OWNER’S MANUAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
RM-1 OWNER’S MANUAL Declaration of Conformity Company Name : OH SUNG ELECTRONICS CO., LTD.
NOTE Page 13
NOTE Page 14
NOTE Page 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.
